bj_power/bj_power_mes/internal/logic/torque.go

package logic

import (
	"context"
	"errors"
	"time"

	"bj_power_mes/ent"
	"bj_power_mes/ent/processflow"
	"bj_power_mes/ent/stepcriterion"
	"bj_power_mes/ent/torquerecord"
	"bj_power_mes/ent/workpieceprocess"
)

type TorqueReq struct {
	Sn          string    `json:"sn"`
	WorkOrder   string    `json:"workOrder"`
	WorkOrderNo string    `json:"workOrderNo"`
	StationNo   string    `json:"stationNo"`
	ScrewNo     string    `json:"screwNo"`
	Strain      float64   `json:"strain"` // 扭矩
	Torque      float64   `json:"torque"`
	Angle       float64   `json:"angle"`
	Result      string    `json:"result"`
	Operator    string    `json:"operator"`
	Time        time.Time `json:"time"`
}

// ReportTorque 接收拧紧数据（工位终端/内部接口上报），入库并做扭矩 RANGE 判定写 step_data
func (s *Service) ReportTorque(ctx context.Context, req TorqueReq, operator string) error {
	if req.Sn == "" {
		return errors.New("sn 不能为空")
	}
	if req.Strain == 0 {
		req.Strain = req.Torque
	}
	result := req.Result
	if result == "" {
		result = "OK"
	}
	workOrderNo := req.WorkOrder
	if workOrderNo == "" {
		workOrderNo = req.WorkOrderNo
	}
	if req.Time.IsZero() {
		req.Time = time.Now()
	}
	_, err := s.ctx.EntClient.TorqueRecord.Create().
		SetWorkOrderNo(workOrderNo).SetSn(req.Sn).SetScrewNo(req.ScrewNo).
		SetStrain(req.Strain).SetTorque(req.Strain).SetAngle(req.Angle).
		SetResult(result).SetOperator(req.Operator).SetStationNo(req.StationNo).
		SetTime(req.Time).Save(ctx)
	if err != nil {
		return err
	}
	s.ctx.EventLog.Write(ctx, "torque.report", workOrderNo, operator, "torque_record", req.Sn, "接收拧紧数据上报", map[string]any{"strain": req.Strain, "angle": req.Angle, "result": result})
	s.evaluateTorqueCriterion(ctx, req.Sn, req.StationNo, req.Strain, req.Angle, operator)
	s.notifyDashboard()
	return nil
}

// evaluateTorqueCriterion 依据 step_criterion RANGE 自动判定 OK/NG 写入 step_data
func (s *Service) evaluateTorqueCriterion(ctx context.Context, sn, stationNo string, strain, angle float64, operator string) {
	q := s.ctx.EntClient.StepCriterion.Query().Where(stepcriterion.Name("扭矩"))
	crits, _ := q.All(ctx)
	for _, c := range crits {
		if c.Logic != "RANGE" {
			continue
		}
		ok := true
		if c.Min != nil && strain < *c.Min {
			ok = false
		}
		if c.Max != nil && strain > *c.Max {
			ok = false
		}
		_, _ = s.ctx.EntClient.StepData.Create().
			SetSn(sn).SetStepId(c.StepId).SetCriterionId(c.ID).
			SetCriterionName(c.Name).SetCriterionLogic(c.Logic).
			SetValue(strain).SetIsOK(ok).SetOperator(operator).Save(ctx)
	}
}

// ListTorqueRecords 查询拧紧数据
func (s *Service) ListTorqueRecords(ctx context.Context, sn, workOrderNo string, from, to time.Time) ([]*ent.TorqueRecord, error) {
	q := s.ctx.EntClient.TorqueRecord.Query()
	if sn != "" {
		// 大小写不敏感（2026-09-08 全项目搜索规范）
		q = q.Where(torquerecord.SnEqualFold(sn))
	}
	if workOrderNo != "" {
		q = q.Where(torquerecord.WorkOrderNoEqualFold(workOrderNo))
	}
	return q.Order(ent.Desc(torquerecord.FieldTime)).Limit(500).All(ctx)
}

// AddTorqueRecord 拧紧数据补录（管理端"拧紧查询-拧紧补录"tab 用，定位为设备漏传/手工修正）
func (s *Service) AddTorqueRecord(ctx context.Context, sn, workOrderNo, screwNo, stationNo string, strain, angle float64, result, reason, operator string) error {
	if sn == "" || workOrderNo == "" {
		return errors.New("工单号与 SN 必填")
	}
	if reason == "" {
		return errors.New("补录原因必填（如：设备漏传/手工修正）")
	}
	if result == "" {
		result = "OK"
	}
	now := time.Now()
	_, err := s.ctx.EntClient.TorqueRecord.Create().
		SetSn(sn).SetWorkOrderNo(workOrderNo).SetScrewNo(screwNo).SetStationNo(stationNo).
		SetStrain(strain).SetTorque(strain).SetAngle(angle).
		SetResult(result).SetOperator(operator+"(补录)").SetTime(now).
		Save(ctx)
	if err != nil {
		return err
	}
	s.ctx.EventLog.Write(ctx, "torque.manual.add", workOrderNo, operator, "torque_record", sn,
		"拧紧数据补录 "+workOrderNo+" "+sn, map[string]any{"reason": reason, "result": result, "screwNo": screwNo, "stationNo": stationNo})
	return nil
}

// 计算一块工件某工序的扭矩步骤是否已报
func (s *Service) hasWorkpieceProcess(ctx context.Context, sn string, processCode int) bool {
	cnt, _ := s.ctx.EntClient.WorkpieceProcess.Query().
		Where(workpieceprocess.Sn(sn), workpieceprocess.ProcessCode(processCode)).Count(ctx)
	return cnt > 0
}

// ProcessStepTemplate 下发给前端渲染的参数采集模板
type ProcessStepTemplate struct {
	ID          int           `json:"id"`
	ProcessCode int           `json:"processCode"`
	Seq         int           `json:"seq"`
	Name        string        `json:"name"`
	CollectType string        `json:"collectType"` // AUTO(拧紧枪自动)/MANUAL(手填)/NONE
	IsTorque    bool          `json:"isTorque"`
	Remark      string        `json:"remark"`
	Criteria    []CriterionVO `json:"criteria"`
}

// CriterionVO 考核标准视图
type CriterionVO struct {
	ID     int      `json:"id"`
	Name   string   `json:"name"`
	Unit   string   `json:"unit"`
	Logic  string   `json:"logic"` // GE/LE/GT/LT/RANGE/EQUAL/NONE
	Target float64  `json:"target"`
	Min    *float64 `json:"min"`
	Max    *float64 `json:"max"`
}

// ListStationSteps 按工位号加载该工位「启用」工艺流程的工序步骤（含考核标准）。
// 手动报工页：选工位 → 自动带出该工位的工序步骤。
func (s *Service) ListStationSteps(ctx context.Context, stationNo int) ([]*ProcessStepTemplate, error) {
	if stationNo < 1 || stationNo > 12 {
		return []*ProcessStepTemplate{}, nil
	}
	flow, err := s.ctx.EntClient.ProcessFlow.Query().
		Where(processflow.ProcessCode(stationNo), processflow.Status("ACTIVE")).First(ctx)
	if err != nil {
		// 该工位未配置启用的工艺流程：返回空模板（前端提示）
		return []*ProcessStepTemplate{}, nil
	}
	return s.flowSteps(ctx, flow.ID, flow.ProcessCode), nil
}

// StepItemReq 一次保存的一个步骤（含其考核标准）
type StepItemReq struct {
	ID          int           `json:"id"`
	ProcessCode int           `json:"processCode"`
	Seq         int           `json:"seq"`
	Name        string        `json:"name"`
	CollectType string        `json:"collectType"`
	IsTorque    bool          `json:"isTorque"`
	Remark      string        `json:"remark"`
	Criteria    []CriterionVO `json:"criteria"`
}