feat: 移除工艺物料与混产模板实体、新增产线清线与 PLC 监控实时推送、看板双屏增强

- 移除实体:MES 删除 FlowMaterial(工艺物料)与 MixProductionTemplate(混产模板)全套(schema/ent 生成码/handler/logic),清理关联路由与种子
- 新增功能:产线清线(line_clearance handler + logic)、PLC 监控 WebSocket 实时推送(ws/plc_monitor_hub + handler)
- 看板增强:新增管理屏与 KPI 组件(BoardManage/BoardKpi),调整演示屏 Mock 与各看板面板
- MES 完善:PLC 匹配/扭矩扫描/签收、工艺卡 PDF 与工单、AGV 链路、叫料/备料/在制品/短料预测等逻辑与前端调整
- 工位终端:删除离线面板 OfflinePanel,调整主界面/物料面板与 api/store/handler/路由
- WMS:AGV 托盘、物料与 MES 客户端调整及前端帮助/基础数据/叫料/托盘页
- 文档:更新产线API/客户问题/案例/部署手册/问题记录
This commit is contained in:
SunYF
2026-11-19 08:31:05 +08:00
parent f8482b18f6
commit 4c4cda1d41
148 changed files with 2511 additions and 9735 deletions
+11 -90
View File
@@ -5,7 +5,6 @@ import (
"errors"
"fmt"
"strconv"
"strings"
"time"
"bj_power_mes/ent"
@@ -206,10 +205,10 @@ func (s *Service) PlcMonitorClearInTransit(ctx context.Context, req ClearInTrans
s.ctx.EventLog.Write(ctx, "plc_in_transit_clear", "", operator, "plc", obj,
desc,
map[string]any{
"object": obj,
"before": before,
"after": 0,
"operator": operator,
"object": obj,
"before": before,
"after": 0,
"operator": operator,
"clearedAt": time.Now().Format(time.RFC3339),
})
return &ClearInTransitResult{Addr: req.Addr, Before: before}, nil
@@ -219,12 +218,12 @@ func (s *Service) PlcMonitorClearInTransit(ctx context.Context, req ClearInTrans
// PositionMismatch 一处「MES 记录有、PLC 实际无」的位置不一致。
type PositionMismatch struct {
WorkpieceID int64 `json:"workpieceId"`
Sn string `json:"sn"`
OrderNo string `json:"orderNo"`
Status string `json:"status"`
AtStationNo int `json:"atStationNo"` // MES 记录的物理位置
CurStationNo int `json:"curStationNo"` // MES 记录的业务位置(最后报工工位)
WorkpieceID int64 `json:"workpieceId"`
Sn string `json:"sn"`
OrderNo string `json:"orderNo"`
Status string `json:"status"`
AtStationNo int `json:"atStationNo"` // MES 记录的物理位置
CurStationNo int `json:"curStationNo"` // MES 记录的业务位置(最后报工工位)
}
// PositionCheck 工件位置核对结果:PLC 实际点位态 + MES 记录与实际不符的工件列表。
@@ -278,7 +277,7 @@ func (s *Service) PlcPositionCheck(ctx context.Context) (*PositionCheck, error)
// CorrectPositionReq 工件位置纠正请求体。
type CorrectPositionReq struct {
WorkpieceID int64 `json:"workpieceId"`
}// PlcPositionCorrect 纠正工件位置:把"记录在工位、实际 PLC 无托盘"的工件清为不在工位(atStationNo=0)。
} // PlcPositionCorrect 纠正工件位置:把"记录在工位、实际 PLC 无托盘"的工件清为不在工位(atStationNo=0)。
// 记操作日志(event_log,type=plc_position_correct),含工件 SN、纠正前/后位置、操作人。
func (s *Service) PlcPositionCorrect(ctx context.Context, req CorrectPositionReq, operator string) error {
if req.WorkpieceID <= 0 {
@@ -308,81 +307,3 @@ func (s *Service) PlcPositionCorrect(ctx context.Context, req CorrectPositionReq
})
return nil
}
// ---------- 末端取件释放(块 H 收尾:末端下料检测位有工位在位信号,但无工位终端/接驳台、不下发 PLC 装配工序码,取件无完成信号,占用台账须人工确认释放) ----------
// EndPointOccupied 末端下料检测位(END-U=G11 上排 / END-D=G12 下排)的一条占用记录。
type EndPointOccupied struct {
PointNo string `json:"pointNo"` // 点位编号 END-U / END-D
Label string `json:"label"` // 点位名称
StationNo int `json:"stationNo"` // 对应工位 11/12
Sn string `json:"sn"` // 占用工件的 SN
OrderNo string `json:"orderNo"` // 来源:所属工单(占用记账时写入)
UpdatedAt int64 `json:"updatedAt"` // 占用时间(点位台账最后更新时间)
}
// ListEndPointOccupied 列出末端下料检测位(G11/G12)当前被占用的记录。
// 末端下料检测位有工位在位信号,但无工位终端/接驳台、不下发 PLC 装配工序码(人工确认工位);取件动作没有「已取走」完成信号,工件被物理取走后点位台账不会自动清,必须人工确认释放。
func (s *Service) ListEndPointOccupied(ctx context.Context) ([]EndPointOccupied, error) {
pts, err := s.ctx.EntClient.LinePoint.Query().
Where(linepoint.PointType("END"), linepoint.Occupied(true)).
Order(ent.Asc(linepoint.FieldSeq)).All(ctx)
if err != nil {
return nil, err
}
out := make([]EndPointOccupied, 0, len(pts))
for _, p := range pts {
out = append(out, EndPointOccupied{
PointNo: p.PointNo,
Label: p.Label,
StationNo: p.StationNo,
Sn: p.CurrentSn,
OrderNo: p.OrderNo,
UpdatedAt: p.UpdatedAt.Unix(),
})
}
return out, nil
}
// ReleaseEndPointReq 末端取件释放请求体。
type ReleaseEndPointReq struct {
PointNo string `json:"pointNo"`
}
// ReleaseEndPoint 人工确认末端取件:释放 G11/G12 点位占用(OccupyPoint OUT)并写操作日志。
// 记 event_log(type=point_release_manual),含 SN、点位、操作人、释放时间、说明「人工确认末端取件」。
func (s *Service) ReleaseEndPoint(ctx context.Context, req ReleaseEndPointReq, operator string) error {
pointNo := strings.TrimSpace(req.PointNo)
if pointNo == "" {
return errors.New("缺少点位编号")
}
pt, err := s.ctx.EntClient.LinePoint.Query().Where(linepoint.PointNo(pointNo)).First(ctx)
if err != nil {
return errors.New("点位不存在:" + pointNo)
}
if pt.PointType != "END" {
return errors.New("仅支持释放末端下料检测位(G11/G12)")
}
if !pt.Occupied {
return errors.New("该点位当前未被占用,无需释放")
}
sn, orderNo := pt.CurrentSn, pt.OrderNo
// 释放点位(唯一事实源维护入口,内部写 line.point.out 流水)
if err := s.OccupyPoint(ctx, pointNo, sn, orderNo, operator, "OUT"); err != nil {
return err
}
now := time.Now().Unix()
s.ctx.EventLog.Write(ctx, "point_release_manual", orderNo, operator, "line_point", pointNo,
"人工确认末端取件:"+pointNo+"("+pt.Label+")",
map[string]any{
"object": "点位 " + pointNo,
"pointNo": pointNo,
"pointLabel": pt.Label,
"sn": sn,
"orderNo": orderNo,
"operator": operator,
"releasedAt": now,
"note": "人工确认末端取件",
})
return nil
}