feat(mes): AGV挂起动作引擎 + 智能跟车流转 + PLC快照缓存(2026-11-19 主控拍板)
一、AGV 挂起动作引擎(弃显式任务队列、弃并发硬拒) - 新增 internal/logic/agv_pending.go:待发动作直接挂任务(pending_action + pending_since), CONTINUE_LIFT(举升完成→continueTask#1)/ WAIT_DROP_CONFIRM(人工确认放下→continueTask#2) / FREE_ROBOT(末组完成→freeRobot);系统动作超 60s 未触发转预警人工重试,绝不自动重发 - Client 新增 ContinueTask(RCS 2.1.2) / FreeRobot(3.1.2),仅点名释放指定车,禁止释放全部 - agv_task 增 pending_action/pending_since 字段,ent 重生成 + db.go 幂等迁移补丁 + migrateonce - 回调按 B01/B02/C01 模板编排:业务流转到位即自动放行放下、回调自动放车; 仅人工派车(MANUAL)挂 WAIT_DROP_CONFIRM;新增 /agv/confirm-drop、/agv/pending/retry - 前端 AgvManual/Agv 确认放下、挂起重试按钮与等待提示联动 二、智能跟车 + 动态目标截断流转引擎 - 新增 internal/logic/flow_engine.go:事件驱动(报工/扫码),读 48 位物理快照,从下游往上游算, 前方占用则动态截断到最近空闲缓存位;IN_TRANSIT 在途闭锁防重复下发,MW=0 才确认到位落台账; 主线占用=台账 OR 传感器,工位 G 位只认台账;在途超 5s 落预警 - workpiece 增 flow_transit_mw/target/at 字段,ent 重生成 + 迁移补丁 三、PLC 读取优化与诊断 - 新增 internal/plc/snapshot_cache.go:2s TTL + singleflight + 写失效,合并 SSE/PLC监控/流转引擎 的重复点位读取;tcp.go 读块重构、localip.go 多网卡、plcdiag 诊断工具、plc_monitor/logging 配套 四、文档与前端 - help.js 重写「工位下发」帮助:明确报工自动驱动流转 vs 下发路线码的定位、缺料/握手/撤回边界 - 案例.md 补充定稿说明;public/index.html 构建指纹更新
This commit is contained in:
@@ -194,6 +194,48 @@ func (_c *WorkpieceCreate) SetNillableTorqueNgBy(v *string) *WorkpieceCreate {
|
||||
return _c
|
||||
}
|
||||
|
||||
// SetFlowTransitMW sets the "flowTransitMW" field.
|
||||
func (_c *WorkpieceCreate) SetFlowTransitMW(v int) *WorkpieceCreate {
|
||||
_c.mutation.SetFlowTransitMW(v)
|
||||
return _c
|
||||
}
|
||||
|
||||
// SetNillableFlowTransitMW sets the "flowTransitMW" field if the given value is not nil.
|
||||
func (_c *WorkpieceCreate) SetNillableFlowTransitMW(v *int) *WorkpieceCreate {
|
||||
if v != nil {
|
||||
_c.SetFlowTransitMW(*v)
|
||||
}
|
||||
return _c
|
||||
}
|
||||
|
||||
// SetFlowTransitTarget sets the "flowTransitTarget" field.
|
||||
func (_c *WorkpieceCreate) SetFlowTransitTarget(v string) *WorkpieceCreate {
|
||||
_c.mutation.SetFlowTransitTarget(v)
|
||||
return _c
|
||||
}
|
||||
|
||||
// SetNillableFlowTransitTarget sets the "flowTransitTarget" field if the given value is not nil.
|
||||
func (_c *WorkpieceCreate) SetNillableFlowTransitTarget(v *string) *WorkpieceCreate {
|
||||
if v != nil {
|
||||
_c.SetFlowTransitTarget(*v)
|
||||
}
|
||||
return _c
|
||||
}
|
||||
|
||||
// SetFlowTransitAt sets the "flowTransitAt" field.
|
||||
func (_c *WorkpieceCreate) SetFlowTransitAt(v time.Time) *WorkpieceCreate {
|
||||
_c.mutation.SetFlowTransitAt(v)
|
||||
return _c
|
||||
}
|
||||
|
||||
// SetNillableFlowTransitAt sets the "flowTransitAt" field if the given value is not nil.
|
||||
func (_c *WorkpieceCreate) SetNillableFlowTransitAt(v *time.Time) *WorkpieceCreate {
|
||||
if v != nil {
|
||||
_c.SetFlowTransitAt(*v)
|
||||
}
|
||||
return _c
|
||||
}
|
||||
|
||||
// SetID sets the "id" field.
|
||||
func (_c *WorkpieceCreate) SetID(v int) *WorkpieceCreate {
|
||||
_c.mutation.SetID(v)
|
||||
@@ -255,6 +297,14 @@ func (_c *WorkpieceCreate) defaults() {
|
||||
v := workpiece.DefaultTorqueNgPending
|
||||
_c.mutation.SetTorqueNgPending(v)
|
||||
}
|
||||
if _, ok := _c.mutation.FlowTransitMW(); !ok {
|
||||
v := workpiece.DefaultFlowTransitMW
|
||||
_c.mutation.SetFlowTransitMW(v)
|
||||
}
|
||||
if _, ok := _c.mutation.FlowTransitTarget(); !ok {
|
||||
v := workpiece.DefaultFlowTransitTarget
|
||||
_c.mutation.SetFlowTransitTarget(v)
|
||||
}
|
||||
}
|
||||
|
||||
// check runs all checks and user-defined validators on the builder.
|
||||
@@ -294,6 +344,17 @@ func (_c *WorkpieceCreate) check() error {
|
||||
return &ValidationError{Name: "torque_ng_by", err: fmt.Errorf(`ent: validator failed for field "Workpiece.torque_ng_by": %w`, err)}
|
||||
}
|
||||
}
|
||||
if _, ok := _c.mutation.FlowTransitMW(); !ok {
|
||||
return &ValidationError{Name: "flowTransitMW", err: errors.New(`ent: missing required field "Workpiece.flowTransitMW"`)}
|
||||
}
|
||||
if _, ok := _c.mutation.FlowTransitTarget(); !ok {
|
||||
return &ValidationError{Name: "flowTransitTarget", err: errors.New(`ent: missing required field "Workpiece.flowTransitTarget"`)}
|
||||
}
|
||||
if v, ok := _c.mutation.FlowTransitTarget(); ok {
|
||||
if err := workpiece.FlowTransitTargetValidator(v); err != nil {
|
||||
return &ValidationError{Name: "flowTransitTarget", err: fmt.Errorf(`ent: validator failed for field "Workpiece.flowTransitTarget": %w`, err)}
|
||||
}
|
||||
}
|
||||
if v, ok := _c.mutation.ID(); ok {
|
||||
if err := workpiece.IDValidator(v); err != nil {
|
||||
return &ValidationError{Name: "id", err: fmt.Errorf(`ent: validator failed for field "Workpiece.id": %w`, err)}
|
||||
@@ -383,6 +444,18 @@ func (_c *WorkpieceCreate) createSpec() (*Workpiece, *sqlgraph.CreateSpec) {
|
||||
_spec.SetField(workpiece.FieldTorqueNgBy, field.TypeString, value)
|
||||
_node.TorqueNgBy = &value
|
||||
}
|
||||
if value, ok := _c.mutation.FlowTransitMW(); ok {
|
||||
_spec.SetField(workpiece.FieldFlowTransitMW, field.TypeInt, value)
|
||||
_node.FlowTransitMW = value
|
||||
}
|
||||
if value, ok := _c.mutation.FlowTransitTarget(); ok {
|
||||
_spec.SetField(workpiece.FieldFlowTransitTarget, field.TypeString, value)
|
||||
_node.FlowTransitTarget = value
|
||||
}
|
||||
if value, ok := _c.mutation.FlowTransitAt(); ok {
|
||||
_spec.SetField(workpiece.FieldFlowTransitAt, field.TypeTime, value)
|
||||
_node.FlowTransitAt = &value
|
||||
}
|
||||
return _node, _spec
|
||||
}
|
||||
|
||||
|
||||
Reference in New Issue
Block a user