Files
bj_power/bj_power_mes/ent/migrate/schema.go
T
SunYF 46fcb59079 feat: 退料闭环定稿(损耗台账/备料清单/退料AGV自动派车/剩余量参考)+ 工位托盘守卫
- MES 新增损耗台账 loss_ledger,差异确认损耗接口 ConfirmReceiveLoss(按工单归集)
- 备料清单 preparation:MES 按 日计划×工单×工位×物料 实时计算,WMS 只读展示 PreparationList
- 退料闭环:N5 工位托盘守卫(未完成禁止退料)、退料 AGV 自动派车(JBT21 空位判定 + 托盘回收链路)、退料参考剩余量接口(应剩余=实备-已耗-已退-已损)
- 新增 AGV 车辆状态表 agv_vehicle_state 及查询
- 整合接驳台/叫料池/库存锁既有闭环,清理 sql 目录注释生成脚本与 catalog,更新文档
2026-11-04 19:06:03 +08:00

1756 lines
87 KiB
Go
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
// Code generated by ent, DO NOT EDIT.
package migrate
import (
"entgo.io/ent/dialect/entsql"
"entgo.io/ent/dialect/sql/schema"
"entgo.io/ent/schema/field"
)
var (
// AgvPointColumns holds the columns for the "agv_point" table.
AgvPointColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "position_code", Type: field.TypeString, Unique: true, Size: 32, Comment: "AGV 点位编码(硬件映射=送往 RCS 的目标坐标,软件不可改)"},
{Name: "name", Type: field.TypeString, Size: 64, Comment: "点位显示名称(可编辑)", Default: ""},
{Name: "is_dock", Type: field.TypeBool, Comment: "是否接驳台点位(true=绑定接驳台,false=纯待命/充电点位)", Default: false},
{Name: "dock_id", Type: field.TypeInt, Nullable: true, Comment: "绑定的接驳台 ID(is_dock=true 时硬件内置强绑定)"},
{Name: "enabled", Type: field.TypeBool, Comment: "是否启用(可编辑)", Default: true},
{Name: "created_at", Type: field.TypeTime},
}
// AgvPointTable holds the schema information for the "agv_point" table.
AgvPointTable = &schema.Table{
Name: "agv_point",
Comment: "AgvPoint AGV 点位(硬件级别真源):点位编码与接驳台一一对应,软件仅可启用/停用与改显示名。",
Columns: AgvPointColumns,
PrimaryKey: []*schema.Column{AgvPointColumns[0]},
Indexes: []*schema.Index{
{
Name: "agvpoint_position_code",
Unique: true,
Columns: []*schema.Column{AgvPointColumns[1]},
},
{
Name: "agvpoint_is_dock",
Unique: false,
Columns: []*schema.Column{AgvPointColumns[3]},
},
{
Name: "agvpoint_enabled",
Unique: false,
Columns: []*schema.Column{AgvPointColumns[5]},
},
},
}
// AgvTasksColumns holds the columns for the "agv_tasks" table.
AgvTasksColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "task_no", Type: field.TypeString, Unique: true, Size: 64, Comment: "我方任务号(内部)"},
{Name: "hik_task_code", Type: field.TypeString, Size: 64, Comment: "RCS-Lite 任务单号(即我方 task_no,下发时透传 taskCode)", Default: ""},
{Name: "source_dock", Type: field.TypeString, Size: 20, Comment: "起点接驳台(空车段可为空=单点path由RCS派最近空闲车)", Default: ""},
{Name: "target_dock", Type: field.TypeString, Size: 20, Comment: "终点接驳台/点位 DOCK01..21 或 AGV-CHARGE01", Default: ""},
{Name: "materials_json", Type: field.TypeString, Size: 4000, Comment: "物料清单 JSON", Default: ""},
{Name: "related_request_no", Type: field.TypeString, Nullable: true, Size: 64, Comment: "关联叫料单号(MES material_request.requestNo)", Default: ""},
{Name: "related_outbound_no", Type: field.TypeString, Nullable: true, Size: 64, Comment: "关联出库单号(可选, WMS 回传)", Default: ""},
{Name: "status", Type: field.TypeString, Size: 20, Comment: "PENDING/FAILED/1已创建/2执行中/ARRIVED到位待令/5已取消/9已结束", Default: "PENDING"},
{Name: "kind", Type: field.TypeString, Size: 20, Comment: "段类型:GO_LOAD空车去装货点/TRANSPORT重载运输/EMPTY_RETURN空车回充/FREE人工自由调度单点段", Default: "TRANSPORT"},
{Name: "biz_type", Type: field.TypeString, Size: 20, Comment: "业务来源:CALL叫料/PALLET托盘回收/FREE自由调度", Default: "CALL"},
{Name: "biz_no", Type: field.TypeString, Size: 64, Comment: "业务单据号(叫料单号/托盘回收标识等)", Default: ""},
{Name: "chain_no", Type: field.TypeString, Size: 64, Comment: "任务链号(=首段taskNo,同链各段关联)", Default: ""},
{Name: "auto_end", Type: field.TypeBool, Comment: "到位自动结束(空车回充段=true,不停留待令)", Default: false},
{Name: "agv_code", Type: field.TypeString, Size: 32, Comment: "RCS 分配的车辆编号(任务分车后由回调/查询回写)", Default: ""},
{Name: "operator", Type: field.TypeString, Size: 64, Comment: "下发人", Default: ""},
{Name: "dispatched_at", Type: field.TypeInt64, Comment: "下发时间 unix秒", Default: 0},
{Name: "arrived_at", Type: field.TypeInt64, Comment: "到位时间 unix秒", Default: 0},
{Name: "remark", Type: field.TypeString, Nullable: true, Size: 500, Comment: "备注/失败原因", Default: ""},
{Name: "created_at", Type: field.TypeInt64, Comment: "创建时间"},
}
// AgvTasksTable holds the schema information for the "agv_tasks" table.
AgvTasksTable = &schema.Table{
Name: "agv_tasks",
Comment: "AgvTask AGV 搬运任务记录:三段链模型(空车去程/重载运输/空车回充),到位进 ARRIVED 待人工确认。",
Columns: AgvTasksColumns,
PrimaryKey: []*schema.Column{AgvTasksColumns[0]},
Indexes: []*schema.Index{
{
Name: "agvtask_task_no",
Unique: true,
Columns: []*schema.Column{AgvTasksColumns[1]},
},
{
Name: "agvtask_target_dock",
Unique: false,
Columns: []*schema.Column{AgvTasksColumns[4]},
},
{
Name: "agvtask_status",
Unique: false,
Columns: []*schema.Column{AgvTasksColumns[8]},
},
{
Name: "agvtask_hik_task_code",
Unique: false,
Columns: []*schema.Column{AgvTasksColumns[2]},
},
},
}
// AgvVehicleStateColumns holds the columns for the "agv_vehicle_state" table.
AgvVehicleStateColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "agv_code", Type: field.TypeString, Unique: true, Size: 32, Comment: "车辆编号(RCS robotCode/agvCode;RCS 未分车时=DEFAULT 未知车辆)"},
{Name: "has_pallet", Type: field.TypeBool, Comment: "载货状态:true=有托盘(载货) false=空车", Default: false},
{Name: "source", Type: field.TypeString, Size: 20, Comment: "状态来源:AUTO_LOAD取货确认/AUTO_UNLOAD卸货确认/MANUAL人工维护", Default: "MANUAL"},
{Name: "updated_by", Type: field.TypeString, Size: 64, Comment: "最近更新人", Default: ""},
{Name: "updated_at", Type: field.TypeInt64, Comment: "最近更新时间 unix秒", Default: 0},
{Name: "remark", Type: field.TypeString, Size: 200, Comment: "备注(人工修改原因等)", Default: ""},
}
// AgvVehicleStateTable holds the schema information for the "agv_vehicle_state" table.
AgvVehicleStateTable = &schema.Table{
Name: "agv_vehicle_state",
Comment: "AgvVehicleState AGV 载货状态台账:按 agv_code 逐台记录有托盘/空车,取货/卸货确认与人工维护写入,派车防撞校验消费。",
Columns: AgvVehicleStateColumns,
PrimaryKey: []*schema.Column{AgvVehicleStateColumns[0]},
}
// AlertColumns holds the columns for the "alert" table.
AlertColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "rule_id", Type: field.TypeInt, Comment: "关联规则ID,0=手动触发", Default: 0},
{Name: "type", Type: field.TypeString, Size: 40, Comment: "预警类型"},
{Name: "level", Type: field.TypeString, Size: 20, Comment: "级别:信息/警告/严重(空=历史数据未分级)", Default: ""},
{Name: "target", Type: field.TypeString, Size: 128, Comment: "目标对象(工位/库房/SN 等)", Default: ""},
{Name: "title", Type: field.TypeString, Size: 255, Comment: "标题"},
{Name: "content", Type: field.TypeString, Size: 500, Comment: "内容", Default: ""},
{Name: "ref_type", Type: field.TypeString, Size: 40, Comment: "关联业务类型", Default: ""},
{Name: "ref_id", Type: field.TypeString, Size: 64, Comment: "关联业务ID", Default: ""},
{Name: "order_no", Type: field.TypeString, Size: 64, Comment: "关联工单号(按工单号查询用)", Default: ""},
{Name: "status", Type: field.TypeString, Size: 10, Comment: "UNREAD/READ", Default: "UNREAD"},
{Name: "receiver", Type: field.TypeString, Size: 255, Comment: "接收人", Default: ""},
{Name: "resolved_at", Type: field.TypeTime, Nullable: true, Comment: "处置时间(resolve 时写入,未处置为空)"},
{Name: "resolved_by", Type: field.TypeString, Size: 64, Comment: "处置人(resolve 时写入)", Default: ""},
{Name: "created_at", Type: field.TypeTime},
}
// AlertTable holds the schema information for the "alert" table.
AlertTable = &schema.Table{
Name: "alert",
Comment: "Alert 预警消息:规则命中或手动触发后写入,供前端预警中心收件箱展示",
Columns: AlertColumns,
PrimaryKey: []*schema.Column{AlertColumns[0]},
Indexes: []*schema.Index{
{
Name: "alert_status",
Unique: false,
Columns: []*schema.Column{AlertColumns[10]},
},
{
Name: "alert_type",
Unique: false,
Columns: []*schema.Column{AlertColumns[2]},
},
{
Name: "alert_created_at",
Unique: false,
Columns: []*schema.Column{AlertColumns[14]},
},
},
}
// AlertRuleColumns holds the columns for the "alert_rule" table.
AlertRuleColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "name", Type: field.TypeString, Size: 80, Comment: "规则名称"},
{Name: "type", Type: field.TypeString, Size: 40, Comment: "预警类型 torque_ng/inspection_ng/inventory_low/task_overdue"},
{Name: "threshold", Type: field.TypeFloat64, Comment: "阈值(不同类含义不同)", Default: 0},
{Name: "enabled", Type: field.TypeBool, Comment: "是否启用", Default: true},
{Name: "notify_channels", Type: field.TypeString, Size: 255, Comment: "通知渠道(物料清单无关;本字段为预警通知方式占位,逗号分隔,空=仅预警中心收件箱)", Default: ""},
{Name: "created_by", Type: field.TypeString, Size: 64, Comment: "创建人", Default: ""},
{Name: "created_at", Type: field.TypeTime},
}
// AlertRuleTable holds the schema information for the "alert_rule" table.
AlertRuleTable = &schema.Table{
Name: "alert_rule",
Comment: "AlertRule 预警规则:按类型 + 阈值触发,命中后写入 alert 消息表",
Columns: AlertRuleColumns,
PrimaryKey: []*schema.Column{AlertRuleColumns[0]},
Indexes: []*schema.Index{
{
Name: "alertrule_type",
Unique: false,
Columns: []*schema.Column{AlertRuleColumns[2]},
},
{
Name: "alertrule_enabled",
Unique: false,
Columns: []*schema.Column{AlertRuleColumns[4]},
},
},
}
// AssociationTraceColumns holds the columns for the "association_trace" table.
AssociationTraceColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "finished_sn", Type: field.TypeString, Unique: true, Size: 64, Comment: "成品SN(主件)"},
{Name: "order_no", Type: field.TypeString, Size: 64, Default: ""},
{Name: "process_code", Type: field.TypeString, Size: 64, Comment: "成品的工序组合", Default: ""},
{Name: "batch_items", Type: field.TypeJSON, Nullable: true, Comment: "结构件批次号列表", SchemaType: map[string]string{"postgres": "jsonb"}},
{Name: "serial_items", Type: field.TypeJSON, Nullable: true, Comment: "电气件SN码列表", SchemaType: map[string]string{"postgres": "jsonb"}},
{Name: "operator", Type: field.TypeString, Size: 64, Comment: "完工关联登记人", Default: ""},
{Name: "created_at", Type: field.TypeTime},
}
// AssociationTraceTable holds the schema information for the "association_trace" table.
AssociationTraceTable = &schema.Table{
Name: "association_trace",
Comment: "AssociationTrace 成品追溯关联:成品SN ↔ 结构件批次 + 电气件SN",
Columns: AssociationTraceColumns,
PrimaryKey: []*schema.Column{AssociationTraceColumns[0]},
Indexes: []*schema.Index{
{
Name: "associationtrace_finished_sn",
Unique: true,
Columns: []*schema.Column{AssociationTraceColumns[1]},
},
},
}
// AttachmentColumns holds the columns for the "attachment" table.
AttachmentColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "biz_type", Type: field.TypeString, Size: 40, Comment: "业务类型 work_order/material/process_flow/inspection"},
{Name: "biz_id", Type: field.TypeString, Size: 64, Comment: "业务ID"},
{Name: "file_name", Type: field.TypeString, Size: 255, Comment: "原始文件名"},
{Name: "file_path", Type: field.TypeString, Size: 255, Comment: "上传目录相对路径"},
{Name: "file_size", Type: field.TypeInt, Comment: "字节数", Default: 0},
{Name: "uploader", Type: field.TypeString, Size: 64, Comment: "上传人", Default: ""},
{Name: "created_at", Type: field.TypeTime},
{Name: "file_type", Type: field.TypeString, Size: 32, Comment: "文件类型 大写枚举 PROCESS_PDF/INSPECTION_PHOTO/...", Default: "OTHER"},
{Name: "file_ext", Type: field.TypeString, Size: 16, Comment: "扩展名(小写,不含点)", Default: ""},
{Name: "file_md5", Type: field.TypeString, Size: 64, Comment: "文件MD5(秒传/去重)", Default: ""},
{Name: "mime_type", Type: field.TypeString, Size: 128, Comment: "MIME类型", Default: ""},
{Name: "deleted", Type: field.TypeBool, Comment: "逻辑删除", Default: false},
{Name: "deleted_at", Type: field.TypeInt64, Comment: "删除时间(unix秒)", Default: 0},
{Name: "deleted_by", Type: field.TypeString, Size: 64, Comment: "删除人", Default: ""},
{Name: "deleted_reason", Type: field.TypeString, Size: 255, Comment: "删除说明(删除弹窗填写,警示留痕)", Default: ""},
{Name: "purged_at", Type: field.TypeInt64, Comment: "彻底清除时间(unix秒,仅删文件留索引)", Default: 0},
{Name: "purged_by", Type: field.TypeString, Size: 64, Comment: "彻底清除操作人", Default: ""},
}
// AttachmentTable holds the schema information for the "attachment" table.
AttachmentTable = &schema.Table{
Name: "attachment",
Comment: "Attachment 业务附件:图纸 / 照片 / 文档等,按 bizType+bizId 关联业务单据。",
Columns: AttachmentColumns,
PrimaryKey: []*schema.Column{AttachmentColumns[0]},
Indexes: []*schema.Index{
{
Name: "attachment_biz_type_biz_id",
Unique: false,
Columns: []*schema.Column{AttachmentColumns[1], AttachmentColumns[2]},
},
{
Name: "attachment_created_at",
Unique: false,
Columns: []*schema.Column{AttachmentColumns[7]},
},
{
Name: "attachment_file_type",
Unique: false,
Columns: []*schema.Column{AttachmentColumns[8]},
},
{
Name: "attachment_file_md5",
Unique: false,
Columns: []*schema.Column{AttachmentColumns[10]},
},
},
}
// BackupRecordColumns holds the columns for the "backup_record" table.
BackupRecordColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "executed_at", Type: field.TypeInt64, Comment: "备份执行时刻(unix秒)"},
{Name: "range_start", Type: field.TypeInt64, Comment: "备份范围开始(unix秒,含)"},
{Name: "range_end", Type: field.TypeInt64, Comment: "备份范围结束(unix秒,含)"},
{Name: "backup_path", Type: field.TypeString, Comment: "备份包(zip)在目标盘的完整路径"},
{Name: "total_size", Type: field.TypeInt64, Comment: "备份包总字节数", Default: 0},
{Name: "items_json", Type: field.TypeString, Comment: "各数据项及大小(JSON数组:[{name,rows,bytes}])"},
{Name: "status", Type: field.TypeString, Size: 16, Comment: "success/failed/partial/cleanup/cleanup_forced", Default: "success"},
{Name: "operator", Type: field.TypeString, Size: 64, Comment: "操作人", Default: ""},
{Name: "checksum", Type: field.TypeString, Size: 64, Comment: "备份包校验和(sha256,基于 manifest)", Default: ""},
{Name: "scope", Type: field.TypeString, Size: 8, Comment: "写入方 mes/wms", Default: "mes"},
{Name: "ack_name", Type: field.TypeString, Size: 64, Comment: "强制清理时填写姓名(警示留痕,非强制清理为空)", Default: ""},
{Name: "ack_phone", Type: field.TypeString, Size: 32, Comment: "强制清理时填写手机号(警示留痕,非强制清理为空)", Default: ""},
}
// BackupRecordTable holds the schema information for the "backup_record" table.
BackupRecordTable = &schema.Table{
Name: "backup_record",
Comment: "BackupRecord 备份记录:备份到外部存储写一条,清理前校验时间窗覆盖",
Columns: BackupRecordColumns,
PrimaryKey: []*schema.Column{BackupRecordColumns[0]},
Indexes: []*schema.Index{
{
Name: "backuprecord_range_start",
Unique: false,
Columns: []*schema.Column{BackupRecordColumns[2]},
},
{
Name: "backuprecord_range_end",
Unique: false,
Columns: []*schema.Column{BackupRecordColumns[3]},
},
{
Name: "backuprecord_status",
Unique: false,
Columns: []*schema.Column{BackupRecordColumns[7]},
},
},
}
// CallPoolColumns holds the columns for the "call_pool" table.
CallPoolColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "station_no", Type: field.TypeInt, Comment: "工位号"},
{Name: "material_code", Type: field.TypeString, Size: 64, Comment: "物料编码(图号)"},
{Name: "material_name", Type: field.TypeString, Size: 128, Default: ""},
{Name: "unit", Type: field.TypeString, Size: 16, Default: ""},
{Name: "sn_mode", Type: field.TypeInt, Default: 2},
{Name: "req_qty", Type: field.TypeInt, Comment: "需求量(启用排产派生,逐行向上取整后合计)", Default: 0},
{Name: "adj_qty", Type: field.TypeInt, Comment: "人工调整量(可正可负;改动留痕 event_log)", Default: 0},
{Name: "sent_qty", Type: field.TypeInt, Comment: "已发净额(完成备料实发累加;退库收回扣减回补)", Default: 0},
{Name: "reserved_qty", Type: field.TypeInt, Comment: "占用中(待备料叫料单请求量合计)", Default: 0},
{Name: "cross_day", Type: field.TypeBool, Comment: "是否含非今日排产(跨日叫料预警/仓库驳回异常标记)", Default: false},
{Name: "plan_dates", Type: field.TypeString, Size: 255, Comment: "派生快照:贡献需求的排产日期(逗号分隔,可空)", Default: ""},
{Name: "created_at", Type: field.TypeTime},
{Name: "updated_at", Type: field.TypeTime},
}
// CallPoolTable holds the schema information for the "call_pool" table.
CallPoolTable = &schema.Table{
Name: "call_pool",
Comment: "CallPool 叫料池:工位级物料行四数账(需求/调整/已发/占用),来源=启用状态日排产",
Columns: CallPoolColumns,
PrimaryKey: []*schema.Column{CallPoolColumns[0]},
Indexes: []*schema.Index{
{
Name: "callpool_station_no_material_code",
Unique: true,
Columns: []*schema.Column{CallPoolColumns[1], CallPoolColumns[2]},
},
{
Name: "callpool_station_no",
Unique: false,
Columns: []*schema.Column{CallPoolColumns[1]},
},
},
}
// DailyPlanColumns holds the columns for the "daily_plan" table.
DailyPlanColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "order_no", Type: field.TypeString, Size: 64, Comment: "工单号"},
{Name: "plan_date", Type: field.TypeString, Size: 10, Comment: "排产日期 yyyy-MM-dd"},
{Name: "plan_qty", Type: field.TypeInt, Comment: "计划数量", Default: 0},
{Name: "completed_qty", Type: field.TypeInt, Comment: "已完成数量", Default: 0},
{Name: "station_plan_qty", Type: field.TypeJSON, Nullable: true, Comment: "各工位产量分配 stationNo→计划产量", SchemaType: map[string]string{"postgres": "jsonb"}},
{Name: "status", Type: field.TypeString, Size: 20, Default: "PENDING"},
{Name: "operator", Type: field.TypeString, Size: 64, Default: ""},
{Name: "created_at", Type: field.TypeTime},
{Name: "updated_at", Type: field.TypeTime, Nullable: true},
}
// DailyPlanTable holds the schema information for the "daily_plan" table.
DailyPlanTable = &schema.Table{
Name: "daily_plan",
Comment: "DailyPlan 日排产:仅预告,不触发出库/领料",
Columns: DailyPlanColumns,
PrimaryKey: []*schema.Column{DailyPlanColumns[0]},
Indexes: []*schema.Index{
{
Name: "dailyplan_order_no",
Unique: false,
Columns: []*schema.Column{DailyPlanColumns[1]},
},
{
Name: "dailyplan_plan_date",
Unique: false,
Columns: []*schema.Column{DailyPlanColumns[2]},
},
{
Name: "dailyplan_plan_date_order_no",
Unique: true,
Columns: []*schema.Column{DailyPlanColumns[2], DailyPlanColumns[1]},
},
},
}
// DockColumns holds the columns for the "dock" table.
DockColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "dock_code", Type: field.TypeString, Unique: true, Size: 20, Comment: "接驳台编码 DOCK01..21"},
{Name: "name", Type: field.TypeString, Size: 64, Comment: "接驳台名称", Default: ""},
{Name: "dock_type", Type: field.TypeString, Size: 16, Comment: "类型 line产线/store库房/other其他", Default: "line"},
{Name: "station_no", Type: field.TypeInt, Comment: "关联工位号(与工位1:1,非产线为0)", Default: 0},
{Name: "side", Type: field.TypeString, Size: 8, Comment: "左右:left=操作员左手边/right=右手边(按操作员朝向区分,下排工位与地图左右相反)", Default: "left"},
{Name: "has_pallet", Type: field.TypeBool, Comment: "当前是否有托盘", Default: false},
{Name: "pallet_ref", Type: field.TypeString, Nullable: true, Size: 64, Comment: "托盘关联(出库单号/备料单号)", Default: ""},
{Name: "status", Type: field.TypeString, Size: 20, Default: "ENABLED"},
{Name: "created_at", Type: field.TypeTime},
}
// DockTable holds the schema information for the "dock" table.
DockTable = &schema.Table{
Name: "dock",
Comment: "Dock 接驳台主数据:DOCK01~DOCK20(产线,DOCKn↔工位n)+ JBT21(库房收货;T7 2026-11-03 统一代号)。",
Columns: DockColumns,
PrimaryKey: []*schema.Column{DockColumns[0]},
Indexes: []*schema.Index{
{
Name: "dock_dock_code",
Unique: true,
Columns: []*schema.Column{DockColumns[1]},
},
{
Name: "dock_dock_type",
Unique: false,
Columns: []*schema.Column{DockColumns[3]},
},
},
}
// EventLogColumns holds the columns for the "event_log" table.
EventLogColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "event_type", Type: field.TypeString, Size: 50, Comment: "事件类型,如 work.order.create"},
{Name: "work_order_no", Type: field.TypeString, Size: 64, Comment: "关联工单号", Default: ""},
{Name: "operator", Type: field.TypeString, Size: 64, Comment: "操作人", Default: ""},
{Name: "entity_type", Type: field.TypeString, Size: 30, Comment: "实体类型", Default: ""},
{Name: "entity_id", Type: field.TypeString, Size: 50, Comment: "实体标识", Default: ""},
{Name: "description", Type: field.TypeString, Size: 2147483647, Comment: "描述", Default: ""},
{Name: "payload", Type: field.TypeJSON, Nullable: true, Comment: "载荷", SchemaType: map[string]string{"postgres": "jsonb"}},
{Name: "created_at", Type: field.TypeTime, Comment: "创建时间"},
}
// EventLogTable holds the schema information for the "event_log" table.
EventLogTable = &schema.Table{
Name: "event_log",
Comment: "EventLog 操作日志:必须含 workOrderNo(工单号)、operator(操作人)",
Columns: EventLogColumns,
PrimaryKey: []*schema.Column{EventLogColumns[0]},
Indexes: []*schema.Index{
{
Name: "eventlog_event_type",
Unique: false,
Columns: []*schema.Column{EventLogColumns[1]},
},
{
Name: "eventlog_work_order_no",
Unique: false,
Columns: []*schema.Column{EventLogColumns[2]},
},
{
Name: "eventlog_operator",
Unique: false,
Columns: []*schema.Column{EventLogColumns[3]},
},
{
Name: "eventlog_created_at",
Unique: false,
Columns: []*schema.Column{EventLogColumns[8]},
},
},
}
// FlowMaterialColumns holds the columns for the "flow_material" table.
FlowMaterialColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "flow_id", Type: field.TypeInt, Comment: "所属工艺ID"},
{Name: "material_code", Type: field.TypeString, Size: 64, Comment: "物料编码"},
{Name: "material_name", Type: field.TypeString, Size: 128, Default: ""},
{Name: "spec", Type: field.TypeString, Size: 128, Default: ""},
{Name: "unit", Type: field.TypeString, Size: 16, Default: ""},
{Name: "sn_mode", Type: field.TypeInt, Default: 2},
{Name: "unit_qty", Type: field.TypeFloat64, Comment: "单台用量", Default: 0},
{Name: "loss_rate", Type: field.TypeFloat64, Comment: "损耗率%(仅展示口径,不参与备料计算——R7 2026-11-03 拍板:备料量=工单需求×单台用量,损耗走补料审批)", Default: 0},
{Name: "created_at", Type: field.TypeTime},
}
// FlowMaterialTable holds the schema information for the "flow_material" table.
FlowMaterialTable = &schema.Table{
Name: "flow_material",
Comment: "FlowMaterial 工艺物料清单:一道工艺装什么料、单台用多少(备料/齐套校验的唯一源头)。",
Columns: FlowMaterialColumns,
PrimaryKey: []*schema.Column{FlowMaterialColumns[0]},
Indexes: []*schema.Index{
{
Name: "flowmaterial_flow_id",
Unique: false,
Columns: []*schema.Column{FlowMaterialColumns[1]},
},
{
Name: "flowmaterial_flow_id_material_code",
Unique: true,
Columns: []*schema.Column{FlowMaterialColumns[1], FlowMaterialColumns[2]},
},
},
}
// InspectionRecordColumns holds the columns for the "inspection_record" table.
InspectionRecordColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "category", Type: field.TypeString, Size: 20, Comment: "记录类型 CHECKIN/POINT/PROCESS/DONE/ALARM/INCOMING/FINAL/QC_PROCESS"},
{Name: "station_no", Type: field.TypeString, Size: 32, Comment: "工位号", Default: ""},
{Name: "shift", Type: field.TypeString, Size: 20, Comment: "班次 早/中/晚", Default: ""},
{Name: "order_no", Type: field.TypeString, Size: 64, Comment: "工单号", Default: ""},
{Name: "sn", Type: field.TypeString, Size: 64, Comment: "工件SN", Default: ""},
{Name: "result", Type: field.TypeString, Size: 10, Comment: "结论", Default: "OK"},
{Name: "items", Type: field.TypeJSON, Nullable: true, Comment: "点检项/异常类型列表", SchemaType: map[string]string{"postgres": "jsonb"}},
{Name: "photo", Type: field.TypeString, Size: 255, Comment: "拍照文件名", Default: ""},
{Name: "remark", Type: field.TypeString, Size: 500, Comment: "文字描述/签字", Default: ""},
{Name: "operator", Type: field.TypeString, Size: 64, Comment: "操作人", Default: ""},
{Name: "process_code", Type: field.TypeInt, Comment: "所属工位号(过程巡检所在工位)", Default: 0},
{Name: "step_id", Type: field.TypeInt, Comment: "工艺步骤ID(过程巡检逐条关联)", Default: 0},
{Name: "step_name", Type: field.TypeString, Size: 128, Comment: "工艺步骤名称", Default: ""},
{Name: "measured_value", Type: field.TypeString, Size: 64, Comment: "实测值(过程巡检录入)", Default: ""},
{Name: "report_no", Type: field.TypeString, Size: 64, Comment: "报检单号", Default: ""},
{Name: "material_code", Type: field.TypeString, Size: 64, Comment: "物料编码(图号)", Default: ""},
{Name: "material_name", Type: field.TypeString, Size: 128, Comment: "物料名称", Default: ""},
{Name: "manufacturer", Type: field.TypeString, Size: 128, Comment: "生产厂家", Default: ""},
{Name: "inspection_no", Type: field.TypeString, Size: 64, Comment: "检验单号", Default: ""},
{Name: "attachment_ids", Type: field.TypeString, Size: 512, Comment: "附件ID,逗号分隔(关联 attachment 表)", Default: ""},
{Name: "disposal_type", Type: field.TypeString, Size: 20, Comment: "处置类型 退货/返修/退换/报废", Default: ""},
{Name: "disposal_remark", Type: field.TypeString, Size: 500, Comment: "处置说明", Default: ""},
{Name: "batch_sn", Type: field.TypeString, Nullable: true, Size: 128, Comment: "批次号/SN(联动 WMS 在库处置:序列号=是=SN 序列号=否=批次)"},
{Name: "related_standard", Type: field.TypeString, Nullable: true, Size: 255, Comment: "相关标准/试验方案号(完工检用,随成品回流 WMS)"},
{Name: "test_record_no", Type: field.TypeString, Nullable: true, Size: 128, Comment: "试验记录单号(完工检用,随成品回流 WMS)"},
{Name: "created_at", Type: field.TypeTime},
}
// InspectionRecordTable holds the schema information for the "inspection_record" table.
InspectionRecordTable = &schema.Table{
Name: "inspection_record",
Comment: "InspectionRecord 巡检与质量检验记录(PAD 巡检终端 + MES 质量检验录入共用):",
Columns: InspectionRecordColumns,
PrimaryKey: []*schema.Column{InspectionRecordColumns[0]},
Indexes: []*schema.Index{
{
Name: "inspectionrecord_category",
Unique: false,
Columns: []*schema.Column{InspectionRecordColumns[1]},
},
{
Name: "inspectionrecord_station_no",
Unique: false,
Columns: []*schema.Column{InspectionRecordColumns[2]},
},
{
Name: "inspectionrecord_order_no",
Unique: false,
Columns: []*schema.Column{InspectionRecordColumns[4]},
},
{
Name: "inspectionrecord_operator",
Unique: false,
Columns: []*schema.Column{InspectionRecordColumns[10]},
},
},
}
// LinePointColumns holds the columns for the "line_point" table.
LinePointColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "point_type", Type: field.TypeString, Size: 20, Comment: "FEED上料位/STATION工位/CACHE缓存位/DOCK接驳台/END末端"},
{Name: "point_no", Type: field.TypeString, Size: 32, Comment: "点位编号:IN上料位 / 1~10工位 / C1~C8缓存位 / 1-R1接驳台 / END-U上排末端 / END-D下排末端"},
{Name: "label", Type: field.TypeString, Size: 64, Comment: "点位名称", Default: ""},
{Name: "seq", Type: field.TypeInt, Comment: "传送带顺序(上料位→工位→末端,用于相邻缓存位判定)", Default: 0},
{Name: "station_no", Type: field.TypeInt, Comment: "所属工位号(DOCK/CACHE 归属;0=无)", Default: 0},
{Name: "current_sn", Type: field.TypeString, Size: 128, Comment: "当前存放工件SN(空=空闲)", Default: ""},
{Name: "order_no", Type: field.TypeString, Size: 64, Comment: "当前工件所属工单号", Default: ""},
{Name: "occupied", Type: field.TypeBool, Comment: "是否占用", Default: false},
{Name: "updated_at", Type: field.TypeTime},
}
// LinePointTable holds the schema information for the "line_point" table.
LinePointTable = &schema.Table{
Name: "line_point",
Comment: "LinePoint 产线点位台账:记录每个点位当前存放的工件(唯一事实源)。",
Columns: LinePointColumns,
PrimaryKey: []*schema.Column{LinePointColumns[0]},
Indexes: []*schema.Index{
{
Name: "linepoint_point_type_point_no",
Unique: true,
Columns: []*schema.Column{LinePointColumns[1], LinePointColumns[2]},
},
},
}
// LossLedgersColumns holds the columns for the "loss_ledgers" table.
LossLedgersColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "station_no", Type: field.TypeInt, Comment: "工位号"},
{Name: "material_code", Type: field.TypeString, Size: 64, Comment: "物料编码(图号)"},
{Name: "material_name", Type: field.TypeString, Size: 128, Comment: "物料名称", Default: ""},
{Name: "theory_qty", Type: field.TypeFloat64, Comment: "理论应退量"},
{Name: "actual_qty", Type: field.TypeFloat64, Comment: "实际退回量"},
{Name: "loss_qty", Type: field.TypeFloat64, Comment: "损耗量(理论-实际)"},
{Name: "reason", Type: field.TypeString, Size: 200, Comment: "损耗原因(必填)"},
{Name: "return_no", Type: field.TypeString, Size: 64, Comment: "关联退库单号(material_request.requestNo)", Default: ""},
{Name: "work_order_no", Type: field.TypeString, Size: 64, Comment: "关联工单号(可空)", Default: ""},
{Name: "status", Type: field.TypeString, Size: 20, Comment: "PENDING待批注/COMMENTED已批注", Default: "PENDING"},
{Name: "comment", Type: field.TypeString, Size: 300, Comment: "主管批注回复", Default: ""},
{Name: "commenter", Type: field.TypeString, Size: 64, Comment: "批注人", Default: ""},
{Name: "commented_at", Type: field.TypeInt64, Comment: "批注时间 unix秒", Default: 0},
{Name: "operator", Type: field.TypeString, Size: 64, Comment: "退料操作人", Default: ""},
{Name: "created_at", Type: field.TypeTime},
}
// LossLedgersTable holds the schema information for the "loss_ledgers" table.
LossLedgersTable = &schema.Table{
Name: "loss_ledgers",
Comment: "LossLedger 损耗台账:退料差额自动落账,主管批注(后审核)。",
Columns: LossLedgersColumns,
PrimaryKey: []*schema.Column{LossLedgersColumns[0]},
Indexes: []*schema.Index{
{
Name: "lossledger_station_no",
Unique: false,
Columns: []*schema.Column{LossLedgersColumns[1]},
},
{
Name: "lossledger_status",
Unique: false,
Columns: []*schema.Column{LossLedgersColumns[10]},
},
{
Name: "lossledger_return_no",
Unique: false,
Columns: []*schema.Column{LossLedgersColumns[8]},
},
},
}
// MaterialsColumns holds the columns for the "materials" table.
MaterialsColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "code", Type: field.TypeString, Unique: true, Size: 64, Comment: "物料编码(图号),两库同步唯一业务键"},
{Name: "name", Type: field.TypeString, Size: 128, Comment: "物料名称"},
{Name: "spec", Type: field.TypeString, Size: 128, Comment: "规格型号", Default: ""},
{Name: "unit", Type: field.TypeString, Size: 32, Comment: "计量单位", Default: ""},
{Name: "description", Type: field.TypeString, Size: 255, Comment: "说明", Default: ""},
{Name: "item_type", Type: field.TypeInt, Comment: "物料类别 1原材料/3成品(半成品不是物料类别,「其他」已移除)", Default: 1},
{Name: "manage_mode", Type: field.TypeInt, Comment: "类型 1结构件/2电气件/3其他(仅分类,不决定SN行为)", Default: 1},
{Name: "sn_mode", Type: field.TypeInt, Comment: "是否逐件SN管理 0未选择(必填)/1序列号=是(录SN)/2序列号=否(不录SN)", Default: 0},
{Name: "template_code", Type: field.TypeString, Size: 64, Comment: "模板编码", Default: ""},
{Name: "safety_stock", Type: field.TypeInt, Comment: "安全库存(低于触发缺货预警)", Default: 0},
{Name: "is_active", Type: field.TypeBool, Comment: "启用/停用(两库均不物理删除)", Default: true},
{Name: "sync_pending", Type: field.TypeBool, Comment: "推送WMS失败标记,列表请求时异步重推", Default: false},
{Name: "created_at", Type: field.TypeTime},
{Name: "updated_at", Type: field.TypeTime},
}
// MaterialsTable holds the schema information for the "materials" table.
MaterialsTable = &schema.Table{
Name: "materials",
Comment: "Material 物料主数据 MES 本地副本(两库对等双向同步,2026-09-29 定稿 M1)。",
Columns: MaterialsColumns,
PrimaryKey: []*schema.Column{MaterialsColumns[0]},
Indexes: []*schema.Index{
{
Name: "material_code",
Unique: true,
Columns: []*schema.Column{MaterialsColumns[1]},
},
{
Name: "material_item_type",
Unique: false,
Columns: []*schema.Column{MaterialsColumns[6]},
},
},
}
// MaterialQtyReportColumns holds the columns for the "material_qty_report" table.
MaterialQtyReportColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "station_no", Type: field.TypeInt, Comment: "工位号", Default: 0},
{Name: "order_no", Type: field.TypeString, Size: 64, Comment: "工单号", Default: ""},
{Name: "sn", Type: field.TypeString, Size: 64, Comment: "工件SN", Default: ""},
{Name: "material_code", Type: field.TypeString, Size: 64, Comment: "物料编码", Default: ""},
{Name: "material_name", Type: field.TypeString, Size: 128, Comment: "物料名称", Default: ""},
{Name: "plan_qty", Type: field.TypeInt, Comment: "应发数量", Default: 0},
{Name: "actual_qty", Type: field.TypeInt, Comment: "实收数量", Default: 0},
{Name: "diff_qty", Type: field.TypeInt, Comment: "差异=应发-实收", Default: 0},
{Name: "cause", Type: field.TypeString, Size: 255, Comment: "差异原因", Default: ""},
{Name: "status", Type: field.TypeString, Size: 16, Comment: "PENDING/PROCESSING/REPLENISHED/RETURNED/ADJUSTED/CLOSED", Default: "PENDING"},
{Name: "handle_type", Type: field.TypeString, Size: 16, Comment: "处理方式 REPLENISH补发/RETURN退库/ADJUST调整", Default: ""},
{Name: "handle_doc_no", Type: field.TypeString, Size: 64, Comment: "处理生成的单据号(补料单号/退库单号)", Default: ""},
{Name: "handle_note", Type: field.TypeString, Size: 255, Comment: "处理说明", Default: ""},
{Name: "handled_by", Type: field.TypeString, Size: 64, Comment: "处理人", Default: ""},
{Name: "handled_at", Type: field.TypeInt64, Comment: "处理时间(unix 秒)", Default: 0},
{Name: "operator", Type: field.TypeString, Size: 64, Comment: "上报人", Default: ""},
{Name: "created_at", Type: field.TypeTime},
{Name: "resolved_at", Type: field.TypeTime, Nullable: true},
}
// MaterialQtyReportTable holds the schema information for the "material_qty_report" table.
MaterialQtyReportTable = &schema.Table{
Name: "material_qty_report",
Comment: "MaterialQtyReport 工位数量不符上报(客户诉求 问题记录 L482/L486):",
Columns: MaterialQtyReportColumns,
PrimaryKey: []*schema.Column{MaterialQtyReportColumns[0]},
Indexes: []*schema.Index{
{
Name: "materialqtyreport_status",
Unique: false,
Columns: []*schema.Column{MaterialQtyReportColumns[10]},
},
{
Name: "materialqtyreport_station_no",
Unique: false,
Columns: []*schema.Column{MaterialQtyReportColumns[1]},
},
{
Name: "materialqtyreport_order_no",
Unique: false,
Columns: []*schema.Column{MaterialQtyReportColumns[2]},
},
{
Name: "materialqtyreport_created_at",
Unique: false,
Columns: []*schema.Column{MaterialQtyReportColumns[17]},
},
},
}
// MaterialRequestColumns holds the columns for the "material_request" table.
MaterialRequestColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "request_no", Type: field.TypeString, Size: 64, Comment: "叫料单号"},
{Name: "material_code", Type: field.TypeString, Size: 64, Comment: "物料编码"},
{Name: "material_name", Type: field.TypeString, Size: 128, Default: ""},
{Name: "unit", Type: field.TypeString, Size: 16, Default: ""},
{Name: "sn_mode", Type: field.TypeInt, Default: 2},
{Name: "req_qty", Type: field.TypeFloat64, Comment: "请求量(发起时占用叫料池可用量)", Default: 0},
{Name: "status", Type: field.TypeString, Size: 20, Default: "PENDING"},
{Name: "target_dock", Type: field.TypeString, Size: 20, Comment: "目标接驳台(GxR1/GxR2,一单一个托盘)", Default: ""},
{Name: "station_no", Type: field.TypeInt, Comment: "目标工位号", Default: 0},
{Name: "sent_qty", Type: field.TypeFloat64, Comment: "实发量(仓库完成备料时确定,禁单内分批)", Default: 0},
{Name: "returned_qty", Type: field.TypeFloat64, Comment: "退库量(整单退;仓库确认收回后叫料池额度回补)", Default: 0},
{Name: "source", Type: field.TypeString, Size: 16, Comment: "来源 CALL/REFILL", Default: "CALL"},
{Name: "ref_report_no", Type: field.TypeString, Size: 64, Comment: "关联数量不符单号", Default: ""},
{Name: "need_agv", Type: field.TypeBool, Comment: "是否需要AGV配送到接驳台", Default: true},
{Name: "agv_task_no", Type: field.TypeString, Size: 64, Comment: "AGV 任务号(派车成功后回写)", Default: ""},
{Name: "cross_day", Type: field.TypeBool, Comment: "跨日标记:叫料池行含非今日排产(工位预警+仓库可驳回异常)", Default: false},
{Name: "outbound_no", Type: field.TypeString, Size: 255, Comment: "WMS 出库单号(完成备料回写,多个逗号分隔)", Default: ""},
{Name: "reject_reason", Type: field.TypeString, Size: 128, Comment: "驳回理由(仓库拒发时必填)", Default: ""},
{Name: "borrow_from", Type: field.TypeJSON, Nullable: true, Comment: "跨工位借料来源 stationNo→借用量;空=本工位自取", SchemaType: map[string]string{"postgres": "jsonb"}},
{Name: "operator", Type: field.TypeString, Size: 64, Default: ""},
{Name: "work_order_no", Type: field.TypeString, Size: 64, Comment: "关联工单号(转产按工单精确退料;普通叫料单为空)", Default: ""},
{Name: "return_dock", Type: field.TypeString, Size: 20, Comment: "退料接驳台(退料/还库时指定从哪个接驳台拉走,AGV 派车依据)", Default: ""},
{Name: "theory_qty", Type: field.TypeFloat64, Nullable: true, Comment: "理论应退量(转产/下班退料按 BOM 计算;实际<理论差额=损耗)"},
{Name: "loss_qty", Type: field.TypeFloat64, Nullable: true, Comment: "损耗量(理论应退-实际退回>0 时记录)"},
{Name: "loss_reason", Type: field.TypeString, Size: 200, Comment: "损耗原因(有损耗时必填,主管在损耗台账批注)", Default: ""},
{Name: "receive_qty", Type: field.TypeFloat64, Nullable: true, Comment: "库管实收量(WMS 确认收货回写)"},
{Name: "receive_diff", Type: field.TypeFloat64, Nullable: true, Comment: "收货差异=应退-实收(>0 为少收,记待核,不自动进损耗台账)"},
{Name: "receive_note", Type: field.TypeString, Size: 200, Comment: "收货差异备注(库管填写,说明差异原因)", Default: ""},
{Name: "created_at", Type: field.TypeTime},
{Name: "updated_at", Type: field.TypeTime, Nullable: true},
}
// MaterialRequestTable holds the schema information for the "material_request" table.
MaterialRequestTable = &schema.Table{
Name: "material_request",
Comment: "MaterialRequest 叫料单:从叫料池发起,不绑工单/排产;七态状态机",
Columns: MaterialRequestColumns,
PrimaryKey: []*schema.Column{MaterialRequestColumns[0]},
Indexes: []*schema.Index{
{
Name: "materialrequest_station_no",
Unique: false,
Columns: []*schema.Column{MaterialRequestColumns[9]},
},
{
Name: "materialrequest_material_code",
Unique: false,
Columns: []*schema.Column{MaterialRequestColumns[2]},
},
{
Name: "materialrequest_status",
Unique: false,
Columns: []*schema.Column{MaterialRequestColumns[7]},
},
{
Name: "materialrequest_work_order_no",
Unique: false,
Columns: []*schema.Column{MaterialRequestColumns[21]},
},
},
}
// PermissionColumns holds the columns for the "permission" table.
PermissionColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "code", Type: field.TypeString, Unique: true, Size: 64, Comment: "权限编码"},
{Name: "name", Type: field.TypeString, Size: 64, Comment: "名称"},
{Name: "type", Type: field.TypeString, Size: 20, Default: "MENU"},
{Name: "parent_code", Type: field.TypeString, Size: 64, Comment: "所属菜单权限码(按钮必填)", Default: ""},
{Name: "path", Type: field.TypeString, Size: 128, Comment: "前端路由", Default: ""},
{Name: "icon", Type: field.TypeString, Size: 64, Default: ""},
{Name: "sort", Type: field.TypeInt, Nullable: true, Default: 0},
{Name: "remark", Type: field.TypeString, Size: 255, Default: ""},
{Name: "created_at", Type: field.TypeTime},
}
// PermissionTable holds the schema information for the "permission" table.
PermissionTable = &schema.Table{
Name: "permission",
Comment: "Permission 权限/菜单",
Columns: PermissionColumns,
PrimaryKey: []*schema.Column{PermissionColumns[0]},
Indexes: []*schema.Index{
{
Name: "permission_code",
Unique: true,
Columns: []*schema.Column{PermissionColumns[1]},
},
},
}
// PlcSendLogColumns holds the columns for the "plc_send_log" table.
PlcSendLogColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "order_no", Type: field.TypeString, Size: 64, Comment: "工单号", Default: ""},
{Name: "sn", Type: field.TypeString, Size: 64, Comment: "工件SN", Default: ""},
{Name: "station_no", Type: field.TypeInt, Nullable: true, Comment: "工位号"},
{Name: "process_combination", Type: field.TypeString, Size: 64, Comment: "工序组合,如 135", Default: ""},
{Name: "process_codes", Type: field.TypeJSON, Nullable: true, Comment: "工序码表"},
{Name: "status", Type: field.TypeString, Size: 20, Default: "PENDING"},
{Name: "send_time", Type: field.TypeTime, Nullable: true, Comment: "下发时间"},
{Name: "done_time", Type: field.TypeTime, Nullable: true, Comment: "收到完成信号时间"},
{Name: "ack", Type: field.TypeBool, Comment: "是否收到完成信号", Default: false},
{Name: "remark", Type: field.TypeString, Size: 255, Default: ""},
{Name: "operator", Type: field.TypeString, Size: 64, Default: ""},
{Name: "created_at", Type: field.TypeTime},
}
// PlcSendLogTable holds the schema information for the "plc_send_log" table.
PlcSendLogTable = &schema.Table{
Name: "plc_send_log",
Comment: "PlcSendLog PLC 工序码下发日志",
Columns: PlcSendLogColumns,
PrimaryKey: []*schema.Column{PlcSendLogColumns[0]},
Indexes: []*schema.Index{
{
Name: "plcsendlog_order_no",
Unique: false,
Columns: []*schema.Column{PlcSendLogColumns[1]},
},
{
Name: "plcsendlog_sn",
Unique: false,
Columns: []*schema.Column{PlcSendLogColumns[2]},
},
{
Name: "plcsendlog_status",
Unique: false,
Columns: []*schema.Column{PlcSendLogColumns[6]},
},
},
}
// ProcessFlowColumns holds the columns for the "process_flow" table.
ProcessFlowColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "name", Type: field.TypeString, Size: 128, Comment: "流程名称,如 3号工位装配流程"},
{Name: "pdf_file", Type: field.TypeString, Size: 255, Comment: "工艺图纸文件名", Default: ""},
{Name: "status", Type: field.TypeString, Size: 20, Default: "ACTIVE"},
{Name: "remark", Type: field.TypeString, Size: 255, Default: ""},
{Name: "created_at", Type: field.TypeTime},
{Name: "updated_at", Type: field.TypeTime, Nullable: true},
}
// ProcessFlowTable holds the schema information for the "process_flow" table.
ProcessFlowTable = &schema.Table{
Name: "process_flow",
Comment: "ProcessFlow 工艺流程图(菜谱):描述“这个工位怎么干”,承载工艺图纸 PDF + 工序步骤模板。",
Columns: ProcessFlowColumns,
PrimaryKey: []*schema.Column{ProcessFlowColumns[0]},
Indexes: []*schema.Index{
{
Name: "processflow_status",
Unique: false,
Columns: []*schema.Column{ProcessFlowColumns[3]},
},
},
}
// ProcessStepColumns holds the columns for the "process_step" table.
ProcessStepColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "flow_id", Type: field.TypeInt, Nullable: true, Comment: "所属工艺流程图ID"},
{Name: "seq", Type: field.TypeInt, Comment: "步骤序号", Default: 1},
{Name: "name", Type: field.TypeString, Size: 128, Comment: "步骤名称"},
{Name: "collect_type", Type: field.TypeString, Size: 20, Comment: "采集方式 AUTO(拧紧枪自动)/MANUAL(手填)/SCAN(扫码,与手填等价采一串字符串)/NONE(仅记录)", Default: "NONE"},
{Name: "need_check", Type: field.TypeBool, Comment: "是否需要检测确认(报工前须检验通过)", Default: false},
{Name: "need_operator_sign", Type: field.TypeBool, Comment: "是否需要操作工签字(报工前须签字确认)", Default: false},
{Name: "need_inspector_sign", Type: field.TypeBool, Comment: "是否需要检验员签字(审核通过并签字后放行)", Default: false},
{Name: "need_audit", Type: field.TypeBool, Comment: "是否需要审核人复核签字(审核通过后放行)", Default: false},
{Name: "audit_role", Type: field.TypeString, Nullable: true, Size: 64, Comment: "审核角色(如班组长/工艺员),具该角色的人员可签", Default: ""},
{Name: "attachment", Type: field.TypeJSON, Nullable: true, Comment: "本步骤图纸/附件列表 [{name,url}]", SchemaType: map[string]string{"postgres": "jsonb"}},
{Name: "remark", Type: field.TypeString, Size: 255, Default: ""},
{Name: "created_at", Type: field.TypeTime},
}
// ProcessStepTable holds the schema information for the "process_step" table.
ProcessStepTable = &schema.Table{
Name: "process_step",
Comment: "ProcessStep 工序步骤模板:一份工艺流程包含多个采集/考核步骤(按 seq 顺序执行)",
Columns: ProcessStepColumns,
PrimaryKey: []*schema.Column{ProcessStepColumns[0]},
Indexes: []*schema.Index{
{
Name: "processstep_flow_id",
Unique: false,
Columns: []*schema.Column{ProcessStepColumns[1]},
},
},
}
// ProductProcessColumns holds the columns for the "product_process" table.
ProductProcessColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "product_code", Type: field.TypeString, Size: 64, Comment: "产品编码(WMS 物料档案 item_type=3 图号)"},
{Name: "product_name", Type: field.TypeString, Size: 128, Comment: "产品名称(快照,WMS 改名不回写)", Default: ""},
{Name: "name", Type: field.TypeString, Size: 128, Comment: "产品工艺名称,如 DX100常规"},
{Name: "status", Type: field.TypeString, Size: 20, Default: "ACTIVE"},
{Name: "remark", Type: field.TypeString, Size: 255, Default: ""},
{Name: "created_at", Type: field.TypeTime},
}
// ProductProcessTable holds the schema information for the "product_process" table.
ProductProcessTable = &schema.Table{
Name: "product_process",
Comment: "ProductProcess 产品工艺:产品级工艺定义(有序工艺集合,不绑工位;建工单时推导工位并复制为工艺组合快照)",
Columns: ProductProcessColumns,
PrimaryKey: []*schema.Column{ProductProcessColumns[0]},
Indexes: []*schema.Index{
{
Name: "productprocess_product_code",
Unique: false,
Columns: []*schema.Column{ProductProcessColumns[1]},
},
},
}
// ProductProcessItemColumns holds the columns for the "product_process_item" table.
ProductProcessItemColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "product_process_id", Type: field.TypeInt, Comment: "所属产品工艺ID"},
{Name: "seq", Type: field.TypeInt, Comment: "顺序号(从1严格递增,即执行顺序)"},
{Name: "flow_id", Type: field.TypeInt, Comment: "工艺ID(process_flow)"},
{Name: "created_at", Type: field.TypeTime},
}
// ProductProcessItemTable holds the schema information for the "product_process_item" table.
ProductProcessItemTable = &schema.Table{
Name: "product_process_item",
Comment: "ProductProcessItem 产品工艺明细:有序工艺执行点(seq 严格递增=串行;工位建单时推导,不落本表)",
Columns: ProductProcessItemColumns,
PrimaryKey: []*schema.Column{ProductProcessItemColumns[0]},
Indexes: []*schema.Index{
{
Name: "productprocessitem_product_process_id",
Unique: false,
Columns: []*schema.Column{ProductProcessItemColumns[1]},
},
{
Name: "productprocessitem_product_process_id_flow_id",
Unique: true,
Columns: []*schema.Column{ProductProcessItemColumns[1], ProductProcessItemColumns[3]},
},
},
}
// RoleColumns holds the columns for the "role" table.
RoleColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "name", Type: field.TypeString, Size: 64, Comment: "角色名称"},
{Name: "code", Type: field.TypeString, Unique: true, Size: 64, Comment: "角色编码"},
{Name: "remark", Type: field.TypeString, Size: 255, Default: ""},
{Name: "permission_codes", Type: field.TypeJSON, Nullable: true, Comment: "权限编码列表,如 produce.workorder:view", SchemaType: map[string]string{"postgres": "jsonb"}},
{Name: "created_at", Type: field.TypeTime},
{Name: "updated_at", Type: field.TypeTime, Nullable: true, Comment: "更新时间"},
}
// RoleTable holds the schema information for the "role" table.
RoleTable = &schema.Table{
Name: "role",
Comment: "Role 角色:承载菜单/按钮权限",
Columns: RoleColumns,
PrimaryKey: []*schema.Column{RoleColumns[0]},
Indexes: []*schema.Index{
{
Name: "role_code",
Unique: true,
Columns: []*schema.Column{RoleColumns[2]},
},
},
}
// SemiFlowColumns holds the columns for the "semi_flow" table.
SemiFlowColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "sn", Type: field.TypeString, Size: 64, Comment: "工件SN"},
{Name: "order_no", Type: field.TypeString, Size: 64, Default: ""},
{Name: "done_process_codes", Type: field.TypeJSON, Nullable: true, Comment: "已完成工序码(已废除,历史数据保留)"},
{Name: "completed_text", Type: field.TypeString, Size: 64, Comment: "完成至工位快照(如:已完成至工位3;空=尚未报工)", Default: ""},
{Name: "action", Type: field.TypeString, Size: 20, Default: "INBOUND"},
{Name: "target_dock", Type: field.TypeString, Size: 20, Default: ""},
{Name: "operator", Type: field.TypeString, Size: 64, Default: ""},
{Name: "created_at", Type: field.TypeTime},
}
// SemiFlowTable holds the schema information for the "semi_flow" table.
SemiFlowTable = &schema.Table{
Name: "semi_flow",
Comment: "SemiFlow 半成品流转记录:进度快照(完成至工位N),调用 WMS /api/internal/semi/*",
Columns: SemiFlowColumns,
PrimaryKey: []*schema.Column{SemiFlowColumns[0]},
Indexes: []*schema.Index{
{
Name: "semiflow_sn",
Unique: false,
Columns: []*schema.Column{SemiFlowColumns[1]},
},
{
Name: "semiflow_order_no",
Unique: false,
Columns: []*schema.Column{SemiFlowColumns[2]},
},
{
Name: "semiflow_action",
Unique: false,
Columns: []*schema.Column{SemiFlowColumns[5]},
},
},
}
// ShortageRequestsColumns holds the columns for the "shortage_requests" table.
ShortageRequestsColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "station_no", Type: field.TypeInt, Comment: "申请工位号"},
{Name: "material_code", Type: field.TypeString, Size: 64, Comment: "物料编码(图号)"},
{Name: "material_name", Type: field.TypeString, Size: 128, Comment: "物料名称", Default: ""},
{Name: "unit", Type: field.TypeString, Size: 16, Comment: "单位", Default: ""},
{Name: "qty", Type: field.TypeInt, Comment: "补料数量(申请增加的额度)"},
{Name: "reason", Type: field.TypeString, Size: 200, Comment: "补料原因(损耗超标/用量超出预估等,必填)"},
{Name: "status", Type: field.TypeString, Size: 20, Comment: "PENDING待审批/APPROVED已通过/REJECTED已驳回", Default: "PENDING"},
{Name: "comment", Type: field.TypeString, Size: 300, Comment: "主管批注", Default: ""},
{Name: "commenter", Type: field.TypeString, Size: 64, Comment: "审批人", Default: ""},
{Name: "commented_at", Type: field.TypeInt64, Comment: "审批时间 unix秒", Default: 0},
{Name: "operator", Type: field.TypeString, Size: 64, Comment: "申请人", Default: ""},
{Name: "created_at", Type: field.TypeTime},
}
// ShortageRequestsTable holds the schema information for the "shortage_requests" table.
ShortageRequestsTable = &schema.Table{
Name: "shortage_requests",
Comment: "ShortageRequest 补料申请:工位物料不够用申请加量,主管审批后调增叫料池额度。",
Columns: ShortageRequestsColumns,
PrimaryKey: []*schema.Column{ShortageRequestsColumns[0]},
Indexes: []*schema.Index{
{
Name: "shortagerequest_station_no",
Unique: false,
Columns: []*schema.Column{ShortageRequestsColumns[1]},
},
{
Name: "shortagerequest_status",
Unique: false,
Columns: []*schema.Column{ShortageRequestsColumns[7]},
},
},
}
// StationColumns holds the columns for the "station" table.
StationColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "station_no", Type: field.TypeInt, Unique: true, Comment: "工位号 1..12"},
{Name: "name", Type: field.TypeString, Size: 64, Comment: "工位名称", Default: ""},
{Name: "flow_id", Type: field.TypeInt, Nullable: true, Comment: "绑定工艺流程图ID"},
{Name: "station_type", Type: field.TypeString, Size: 20, Comment: "工位类型 LINE/OFFLINE", Default: "LINE"},
{Name: "status", Type: field.TypeString, Size: 20, Default: "ENABLED"},
{Name: "is_builtin", Type: field.TypeBool, Comment: "内置工位:不可改类型/不可删除", Default: false},
{Name: "visible_tabs", Type: field.TypeJSON, Nullable: true},
{Name: "created_at", Type: field.TypeTime},
}
// StationTable holds the schema information for the "station" table.
StationTable = &schema.Table{
Name: "station",
Comment: "Station 工位主数据:工位固定只对应一个工序编号,绑定一个工艺流程图(flowId)",
Columns: StationColumns,
PrimaryKey: []*schema.Column{StationColumns[0]},
Indexes: []*schema.Index{
{
Name: "station_station_no",
Unique: true,
Columns: []*schema.Column{StationColumns[1]},
},
},
}
// StationShiftsColumns holds the columns for the "station_shifts" table.
StationShiftsColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "station_no", Type: field.TypeInt, Comment: "工位号"},
{Name: "operator", Type: field.TypeString, Size: 64, Comment: "当班工人", Default: ""},
{Name: "status", Type: field.TypeString, Size: 20, Comment: "ON_DUTY当班/CLOSING待收尾(有剩余物料退料中)/CLOSED已下班", Default: "ON_DUTY"},
{Name: "start_at", Type: field.TypeInt64, Comment: "班次开始(登录) unix秒", Default: 0},
{Name: "end_apply_at", Type: field.TypeInt64, Comment: "申请下班时间 unix秒", Default: 0},
{Name: "closed_at", Type: field.TypeInt64, Comment: "实际下班(收尾完成) unix秒", Default: 0},
{Name: "remark", Type: field.TypeString, Nullable: true, Size: 300, Comment: "备注(如退料单号/退出未下班警示留痕)", Default: ""},
{Name: "created_at", Type: field.TypeTime},
}
// StationShiftsTable holds the schema information for the "station_shifts" table.
StationShiftsTable = &schema.Table{
Name: "station_shifts",
Comment: "StationShift 工位班次:下班/结束作业闭环状态。",
Columns: StationShiftsColumns,
PrimaryKey: []*schema.Column{StationShiftsColumns[0]},
Indexes: []*schema.Index{
{
Name: "stationshift_station_no",
Unique: false,
Columns: []*schema.Column{StationShiftsColumns[1]},
},
{
Name: "stationshift_status",
Unique: false,
Columns: []*schema.Column{StationShiftsColumns[3]},
},
},
}
// StationStateColumns holds the columns for the "station_state" table.
StationStateColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "station_no", Type: field.TypeInt, Comment: "工位号"},
{Name: "date", Type: field.TypeString, Size: 10, Comment: "生效日期 yyyy-MM-dd(只认当天)"},
{Name: "paused", Type: field.TypeBool, Comment: "是否停止接单", Default: false},
{Name: "reason", Type: field.TypeString, Size: 255, Comment: "停单原因(缺料/故障/其他)", Default: ""},
{Name: "operator", Type: field.TypeString, Size: 64, Comment: "操作人", Default: ""},
{Name: "created_at", Type: field.TypeTime},
{Name: "updated_at", Type: field.TypeTime, Nullable: true},
}
// StationStateTable holds the schema information for the "station_state" table.
StationStateTable = &schema.Table{
Name: "station_state",
Comment: "StationState 工位运行状态(当日有效):工人自主 停止接单/恢复接单。",
Columns: StationStateColumns,
PrimaryKey: []*schema.Column{StationStateColumns[0]},
Indexes: []*schema.Index{
{
Name: "stationstate_station_no_date",
Unique: true,
Columns: []*schema.Column{StationStateColumns[1], StationStateColumns[2]},
},
},
}
// StepCriterionColumns holds the columns for the "step_criterion" table.
StepCriterionColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "step_id", Type: field.TypeInt, Comment: "步骤ID"},
{Name: "name", Type: field.TypeString, Size: 64, Comment: "指标名,如 扭矩/角度"},
{Name: "unit", Type: field.TypeString, Size: 16, Default: ""},
{Name: "logic", Type: field.TypeString, Size: 16, Default: "NONE"},
{Name: "target", Type: field.TypeFloat64, Comment: "目标值", Default: 0},
{Name: "min", Type: field.TypeFloat64, Nullable: true, Comment: "范围下限"},
{Name: "max", Type: field.TypeFloat64, Nullable: true, Comment: "范围上限"},
{Name: "created_at", Type: field.TypeTime},
}
// StepCriterionTable holds the schema information for the "step_criterion" table.
StepCriterionTable = &schema.Table{
Name: "step_criterion",
Comment: "StepCriterion 工序步骤考核标准:如 扭矩在RANGE[35,45] 自动判定 OK",
Columns: StepCriterionColumns,
PrimaryKey: []*schema.Column{StepCriterionColumns[0]},
Indexes: []*schema.Index{
{
Name: "stepcriterion_step_id",
Unique: false,
Columns: []*schema.Column{StepCriterionColumns[1]},
},
},
}
// StepDataColumns holds the columns for the "step_data" table.
StepDataColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "sn", Type: field.TypeString, Size: 64, Comment: "工件SN"},
{Name: "process_id", Type: field.TypeInt, Nullable: true, Comment: "工件工序实绩ID"},
{Name: "step_id", Type: field.TypeInt, Comment: "步骤ID"},
{Name: "step_name", Type: field.TypeString, Size: 128, Default: ""},
{Name: "criterion_id", Type: field.TypeInt, Nullable: true, Comment: "考核标准ID"},
{Name: "criterion_name", Type: field.TypeString, Size: 64, Default: ""},
{Name: "criterion_logic", Type: field.TypeString, Size: 16, Default: "NONE"},
{Name: "value", Type: field.TypeFloat64, Comment: "实际测量值", Default: 0},
{Name: "value_text", Type: field.TypeString, Size: 64, Comment: "文本值(OK/NG/钢印号)", Default: ""},
{Name: "is_ok", Type: field.TypeBool, Comment: "是否合格(可人工修正)", Default: true},
{Name: "operator", Type: field.TypeString, Size: 64, Default: ""},
{Name: "created_at", Type: field.TypeTime},
}
// StepDataTable holds the schema information for the "step_data" table.
StepDataTable = &schema.Table{
Name: "step_data",
Comment: "StepData 步骤考核数据:某工件某工序步骤采集/手填实际值,按考核标准判定 OK/NG",
Columns: StepDataColumns,
PrimaryKey: []*schema.Column{StepDataColumns[0]},
Indexes: []*schema.Index{
{
Name: "stepdata_sn",
Unique: false,
Columns: []*schema.Column{StepDataColumns[1]},
},
{
Name: "stepdata_process_id",
Unique: false,
Columns: []*schema.Column{StepDataColumns[2]},
},
{
Name: "stepdata_step_id",
Unique: false,
Columns: []*schema.Column{StepDataColumns[3]},
},
},
}
// StepSignRecordColumns holds the columns for the "step_sign_record" table.
StepSignRecordColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "sn", Type: field.TypeString, Size: 64, Comment: "工件SN", Default: ""},
{Name: "order_no", Type: field.TypeString, Size: 64, Comment: "工单号", Default: ""},
{Name: "flow_id", Type: field.TypeInt, Comment: "工艺流程ID", Default: 0},
{Name: "station_no", Type: field.TypeString, Size: 32, Comment: "工位号", Default: ""},
{Name: "step_id", Type: field.TypeInt, Comment: "工艺步骤ID", Default: 0},
{Name: "step_name", Type: field.TypeString, Size: 128, Comment: "步骤名称", Default: ""},
{Name: "sign_role", Type: field.TypeString, Size: 16, Comment: "签字角色 OPERATOR/INSPECTOR", Default: "OPERATOR"},
{Name: "result", Type: field.TypeString, Size: 10, Comment: "签字时点的结论 OK/NG", Default: "OK"},
{Name: "signed_by", Type: field.TypeString, Size: 64, Comment: "签字人(登录账号)", Default: ""},
{Name: "signed_at", Type: field.TypeTime, Comment: "签字时间"},
{Name: "round", Type: field.TypeInt, Comment: "返修重做轮次(1=首做)", Default: 1},
{Name: "source", Type: field.TypeString, Size: 20, Comment: "签字来源 station/inspect/migrate", Default: "station"},
{Name: "remark", Type: field.TypeString, Size: 256, Comment: "签字备注(签字弹框选填)", Default: ""},
{Name: "revoked", Type: field.TypeBool, Comment: "是否已撤销", Default: false},
{Name: "revoked_by", Type: field.TypeString, Size: 64, Comment: "撤销人", Default: ""},
{Name: "revoked_at", Type: field.TypeTime, Nullable: true, Comment: "撤销时间"},
{Name: "revoke_reason", Type: field.TypeString, Size: 256, Comment: "撤销原因", Default: ""},
{Name: "created_at", Type: field.TypeTime},
}
// StepSignRecordTable holds the schema information for the "step_sign_record" table.
StepSignRecordTable = &schema.Table{
Name: "step_sign_record",
Comment: "StepSignRecord 步骤签字记录:工艺步骤配置 need_operator_sign/need_inspector_sign 后,",
Columns: StepSignRecordColumns,
PrimaryKey: []*schema.Column{StepSignRecordColumns[0]},
Indexes: []*schema.Index{
{
Name: "stepsignrecord_sn_station_no_step_id_sign_role_round",
Unique: true,
Columns: []*schema.Column{StepSignRecordColumns[1], StepSignRecordColumns[4], StepSignRecordColumns[5], StepSignRecordColumns[7], StepSignRecordColumns[11]},
},
{
Name: "stepsignrecord_sn",
Unique: false,
Columns: []*schema.Column{StepSignRecordColumns[1]},
},
{
Name: "stepsignrecord_order_no",
Unique: false,
Columns: []*schema.Column{StepSignRecordColumns[2]},
},
},
}
// SysConfigColumns holds the columns for the "sys_config" table.
SysConfigColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "key", Type: field.TypeString, Unique: true, Size: 64, Comment: "配置键,如 wms.base_url"},
{Name: "value", Type: field.TypeString, Size: 512, Comment: "配置值"},
{Name: "remark", Type: field.TypeString, Nullable: true, Size: 255, Comment: "说明"},
}
// SysConfigTable holds the schema information for the "sys_config" table.
SysConfigTable = &schema.Table{
Name: "sys_config",
Comment: "SysConfig 系统基础设置(key/value)。",
Columns: SysConfigColumns,
PrimaryKey: []*schema.Column{SysConfigColumns[0]},
}
// TorqueRecordColumns holds the columns for the "torque_record" table.
TorqueRecordColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "work_order_no", Type: field.TypeString, Size: 64, Comment: "workOrder 工单号", Default: ""},
{Name: "sn", Type: field.TypeString, Size: 64, Comment: "工件SN"},
{Name: "screw_no", Type: field.TypeString, Size: 32, Comment: "螺丝编号 S1..Sn", Default: ""},
{Name: "strain", Type: field.TypeFloat64, Comment: "扭矩 Nm", Default: 0},
{Name: "torque", Type: field.TypeFloat64, Comment: "扭矩别名,与 strain 一致", Default: 0},
{Name: "angle", Type: field.TypeFloat64, Comment: "角度 °", Default: 0},
{Name: "result", Type: field.TypeString, Size: 10, Default: "OK"},
{Name: "operator", Type: field.TypeString, Size: 64, Comment: "操作人", Default: ""},
{Name: "operator_id", Type: field.TypeInt, Comment: "操作人用户ID(0=未采集:虚拟工位/PLC路径或历史数据)", Default: 0},
{Name: "station_no", Type: field.TypeString, Size: 32, Comment: "工位", Default: ""},
{Name: "time", Type: field.TypeTime, Comment: "采集时间"},
{Name: "created_at", Type: field.TypeTime},
}
// TorqueRecordTable holds the schema information for the "torque_record" table.
TorqueRecordTable = &schema.Table{
Name: "torque_record",
Comment: "TorqueRecord 拧紧数据(工位终端上报,sn,strain扭矩,angle角度,result,operator,workOrder,time)",
Columns: TorqueRecordColumns,
PrimaryKey: []*schema.Column{TorqueRecordColumns[0]},
Indexes: []*schema.Index{
{
Name: "torquerecord_sn",
Unique: false,
Columns: []*schema.Column{TorqueRecordColumns[2]},
},
{
Name: "torquerecord_work_order_no",
Unique: false,
Columns: []*schema.Column{TorqueRecordColumns[1]},
},
{
Name: "torquerecord_created_at",
Unique: false,
Columns: []*schema.Column{TorqueRecordColumns[12]},
},
{
Name: "torquerecord_time",
Unique: false,
Columns: []*schema.Column{TorqueRecordColumns[11]},
},
},
}
// UserColumns holds the columns for the "user" table.
UserColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "username", Type: field.TypeString, Unique: true, Size: 64, Comment: "登录名"},
{Name: "password", Type: field.TypeString, Size: 128, Comment: "bcrypt 密码"},
{Name: "name", Type: field.TypeString, Size: 64, Comment: "姓名/显示名", Default: ""},
{Name: "role_id", Type: field.TypeInt, Nullable: true, Comment: "角色ID"},
{Name: "can_login_workstation", Type: field.TypeBool, Comment: "是否允许登录工位终端", Default: false},
{Name: "workstation_password", Type: field.TypeString, Nullable: true, Size: 128, Comment: "工位终端密码(bcrypt)"},
{Name: "status", Type: field.TypeString, Size: 20, Default: "ENABLED"},
{Name: "last_login_at", Type: field.TypeInt64, Nullable: true, Comment: "最近登录时间(unix秒,后台登录更新;工位终端登录不计)"},
{Name: "created_at", Type: field.TypeTime},
{Name: "updated_at", Type: field.TypeTime, Nullable: true},
}
// UserTable holds the schema information for the "user" table.
UserTable = &schema.Table{
Name: "user",
Comment: "User 用户",
Columns: UserColumns,
PrimaryKey: []*schema.Column{UserColumns[0]},
Indexes: []*schema.Index{
{
Name: "user_username",
Unique: true,
Columns: []*schema.Column{UserColumns[1]},
},
{
Name: "user_role_id",
Unique: false,
Columns: []*schema.Column{UserColumns[4]},
},
},
}
// UserStationColumns holds the columns for the "user_station" table.
UserStationColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "user_id", Type: field.TypeInt, Comment: "用户ID"},
{Name: "station_no", Type: field.TypeInt, Comment: "工位号 1..12"},
{Name: "created_at", Type: field.TypeTime},
}
// UserStationTable holds the schema information for the "user_station" table.
UserStationTable = &schema.Table{
Name: "user_station",
Comment: "UserStation 用户-工位 关联(一个操作员可绑定多个工位)",
Columns: UserStationColumns,
PrimaryKey: []*schema.Column{UserStationColumns[0]},
Indexes: []*schema.Index{
{
Name: "userstation_user_id",
Unique: false,
Columns: []*schema.Column{UserStationColumns[1]},
},
{
Name: "userstation_station_no",
Unique: false,
Columns: []*schema.Column{UserStationColumns[2]},
},
{
Name: "userstation_user_id_station_no",
Unique: true,
Columns: []*schema.Column{UserStationColumns[1], UserStationColumns[2]},
},
},
}
// WorkOrderColumns holds the columns for the "work_order" table.
WorkOrderColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "work_order_no", Type: field.TypeString, Size: 64, Comment: "工单号"},
{Name: "product_type_id", Type: field.TypeInt, Comment: "产品类型ID"},
{Name: "product_code", Type: field.TypeString, Size: 64, Comment: "产品编码", Default: ""},
{Name: "product_name", Type: field.TypeString, Size: 128, Default: ""},
{Name: "quantity", Type: field.TypeInt, Comment: "工件数量", Default: 1},
{Name: "finished_num", Type: field.TypeInt, Comment: "完成数量", Default: 0},
{Name: "fail_num", Type: field.TypeInt, Comment: "NG数量", Default: 0},
{Name: "contract_no", Type: field.TypeString, Size: 64, Comment: "归属编号(合同号或科技项目号,随归属类型二选一)", Default: ""},
{Name: "ownership_type", Type: field.TypeString, Size: 20, Comment: "归属类型:workorder=合同号/project=科技项目号/other=其他", Default: ""},
{Name: "project_no", Type: field.TypeString, Size: 64, Comment: "工程编号(已废弃,保留防历史数据迁移)", Default: ""},
{Name: "product_serial", Type: field.TypeString, Size: 64, Comment: "产品序号(工单内每台产品的序号)", Default: ""},
{Name: "created_by", Type: field.TypeString, Size: 64, Comment: "创建人", Default: ""},
{Name: "flow_combination", Type: field.TypeJSON, Nullable: true, Comment: "工艺组合 [{flowId,stationNo}] 按工位号升序", SchemaType: map[string]string{"postgres": "jsonb"}},
{Name: "product_process_id", Type: field.TypeInt, Comment: "来源产品工艺ID(0=无来源)", Default: 0},
{Name: "status", Type: field.TypeString, Size: 20, Default: "CREATED"},
{Name: "plan_start", Type: field.TypeTime, Nullable: true, Comment: "计划开始"},
{Name: "plan_end", Type: field.TypeTime, Nullable: true, Comment: "计划结束"},
{Name: "context", Type: field.TypeJSON, Nullable: true, Comment: "扩展字段", SchemaType: map[string]string{"postgres": "jsonb"}},
{Name: "completed_at", Type: field.TypeTime, Nullable: true},
{Name: "actual_start", Type: field.TypeTime, Nullable: true, Comment: "实际开始"},
{Name: "created_at", Type: field.TypeTime},
{Name: "updated_at", Type: field.TypeTime, Nullable: true},
}
// WorkOrderTable holds the schema information for the "work_order" table.
WorkOrderTable = &schema.Table{
Name: "work_order",
Comment: "WorkOrder 工单:一个合同 = 一个工单",
Columns: WorkOrderColumns,
PrimaryKey: []*schema.Column{WorkOrderColumns[0]},
Indexes: []*schema.Index{
{
Name: "workorder_work_order_no",
Unique: true,
Columns: []*schema.Column{WorkOrderColumns[1]},
},
{
Name: "workorder_status",
Unique: false,
Columns: []*schema.Column{WorkOrderColumns[15]},
},
{
Name: "workorder_product_type_id",
Unique: false,
Columns: []*schema.Column{WorkOrderColumns[2]},
},
},
}
// WorkpieceColumns holds the columns for the "workpiece" table.
WorkpieceColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "sn", Type: field.TypeString, Unique: true, Size: 64, Comment: "工件唯一SN"},
{Name: "order_no", Type: field.TypeString, Size: 64, Comment: "所属工单", Default: ""},
{Name: "work_order_id", Type: field.TypeInt, Nullable: true, Comment: "工单ID"},
{Name: "current_station_no", Type: field.TypeInt, Nullable: true, Comment: "业务位置:最后完成报工的工位号(0=未报任何工艺;下一道=工艺组合中工位号更大的下一条)"},
{Name: "at_station_no", Type: field.TypeInt, Nullable: true, Comment: "物理位置:工件当前实际所在工位号(0=未在工位;建档/到达即写,完工/入库清空)"},
{Name: "status", Type: field.TypeString, Size: 20, Default: "NEW"},
{Name: "online_at", Type: field.TypeTime, Nullable: true, Comment: "进线时间"},
{Name: "done_at", Type: field.TypeTime, Nullable: true, Comment: "完工时间"},
{Name: "created_at", Type: field.TypeTime},
{Name: "updated_at", Type: field.TypeTime, Nullable: true},
{Name: "torque_ng_pending", Type: field.TypeBool, Comment: "拧紧扭矩不合格待人工处置标记", Default: false},
{Name: "torque_ng_at", Type: field.TypeTime, Nullable: true, Comment: "拧紧不合格标记时间"},
{Name: "torque_ng_by", Type: field.TypeString, Nullable: true, Size: 64, Comment: "拧紧不合格标记操作人"},
}
// WorkpieceTable holds the schema information for the "workpiece" table.
WorkpieceTable = &schema.Table{
Name: "workpiece",
Comment: "Workpiece 工件(SN):序列号管理的成品/主件",
Columns: WorkpieceColumns,
PrimaryKey: []*schema.Column{WorkpieceColumns[0]},
Indexes: []*schema.Index{
{
Name: "workpiece_sn",
Unique: true,
Columns: []*schema.Column{WorkpieceColumns[1]},
},
{
Name: "workpiece_order_no",
Unique: false,
Columns: []*schema.Column{WorkpieceColumns[2]},
},
{
Name: "workpiece_status",
Unique: false,
Columns: []*schema.Column{WorkpieceColumns[6]},
},
},
}
// WorkpieceBindColumns holds the columns for the "workpiece_bind" table.
WorkpieceBindColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "sn", Type: field.TypeString, Size: 64, Comment: "工件SN"},
{Name: "order_no", Type: field.TypeString, Size: 64, Comment: "工单号", Default: ""},
{Name: "flow_id", Type: field.TypeInt, Comment: "装配工艺ID"},
{Name: "station_no", Type: field.TypeString, Size: 32, Comment: "绑定工位", Default: ""},
{Name: "material_code", Type: field.TypeString, Size: 64, Comment: "物料编码"},
{Name: "material_name", Type: field.TypeString, Size: 128, Comment: "物料名称", Default: ""},
{Name: "spec", Type: field.TypeString, Size: 128, Comment: "规格", Default: ""},
{Name: "unit", Type: field.TypeString, Size: 16, Comment: "单位", Default: ""},
{Name: "sn_mode", Type: field.TypeInt, Default: 2},
{Name: "bind_value", Type: field.TypeString, Size: 128, Comment: "绑定值:批次号 或 SN"},
{Name: "bind_type", Type: field.TypeString, Size: 10, Default: "SN"},
{Name: "operator", Type: field.TypeString, Size: 64, Comment: "操作人", Default: ""},
{Name: "created_at", Type: field.TypeTime, Comment: "绑定时间"},
}
// WorkpieceBindTable holds the schema information for the "workpiece_bind" table.
WorkpieceBindTable = &schema.Table{
Name: "workpiece_bind",
Comment: "WorkpieceBind 装机绑定:某工件在某一工序装配时,把实际装上的部件(结构件=批次号 / 电气件=SN)",
Columns: WorkpieceBindColumns,
PrimaryKey: []*schema.Column{WorkpieceBindColumns[0]},
Indexes: []*schema.Index{
{
Name: "workpiecebind_sn",
Unique: false,
Columns: []*schema.Column{WorkpieceBindColumns[1]},
},
{
Name: "workpiecebind_sn_flow_id",
Unique: false,
Columns: []*schema.Column{WorkpieceBindColumns[1], WorkpieceBindColumns[3]},
},
{
Name: "workpiecebind_sn_material_code",
Unique: false,
Columns: []*schema.Column{WorkpieceBindColumns[1], WorkpieceBindColumns[5]},
},
{
Name: "workpiecebind_order_no",
Unique: false,
Columns: []*schema.Column{WorkpieceBindColumns[2]},
},
{
Name: "workpiecebind_material_code_bind_value",
Unique: false,
Columns: []*schema.Column{WorkpieceBindColumns[5], WorkpieceBindColumns[10]},
},
},
}
// WorkpieceLifecycleLogColumns holds the columns for the "workpiece_lifecycle_log" table.
WorkpieceLifecycleLogColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "sn", Type: field.TypeString, Size: 64, Comment: "工件SN"},
{Name: "work_order_no", Type: field.TypeString, Size: 64, Comment: "所属工单", Default: ""},
{Name: "action", Type: field.TypeString, Size: 20, Comment: "状态动作:NEW/ONLINE/REPORT/SEMI_IN/SEMI_OUT/DONE/SCRAPPED"},
{Name: "from_status", Type: field.TypeString, Size: 20, Comment: "变更前状态", Default: ""},
{Name: "to_status", Type: field.TypeString, Size: 20, Comment: "变更后状态", Default: ""},
{Name: "station_no", Type: field.TypeInt, Nullable: true, Comment: "关联工位号"},
{Name: "flow_seq", Type: field.TypeInt, Nullable: true, Comment: "工艺序号(工序顺序)"},
{Name: "operator", Type: field.TypeString, Size: 64, Comment: "操作人", Default: ""},
{Name: "source", Type: field.TypeString, Size: 32, Comment: "来源:workstation/mes/admin/reconcile", Default: ""},
{Name: "remark", Type: field.TypeString, Size: 255, Comment: "备注", Default: ""},
{Name: "created_at", Type: field.TypeTime},
}
// WorkpieceLifecycleLogTable holds the schema information for the "workpiece_lifecycle_log" table.
WorkpieceLifecycleLogTable = &schema.Table{
Name: "workpiece_lifecycle_log",
Comment: "工件生命周期状态流水:NEW/ONLINE/REPORT/SEMI_IN/SEMI_OUT/DONE/SCRAPPED,所有状态变更点同事务写",
Columns: WorkpieceLifecycleLogColumns,
PrimaryKey: []*schema.Column{WorkpieceLifecycleLogColumns[0]},
Indexes: []*schema.Index{
{
Name: "workpiecelifecyclelog_sn_created_at",
Unique: false,
Columns: []*schema.Column{WorkpieceLifecycleLogColumns[1], WorkpieceLifecycleLogColumns[11]},
},
{
Name: "workpiecelifecyclelog_work_order_no_created_at",
Unique: false,
Columns: []*schema.Column{WorkpieceLifecycleLogColumns[2], WorkpieceLifecycleLogColumns[11]},
},
{
Name: "workpiecelifecyclelog_action_created_at",
Unique: false,
Columns: []*schema.Column{WorkpieceLifecycleLogColumns[3], WorkpieceLifecycleLogColumns[11]},
},
},
}
// WorkpieceProcessColumns holds the columns for the "workpiece_process" table.
WorkpieceProcessColumns = []*schema.Column{
{Name: "id", Type: field.TypeInt, Increment: true},
{Name: "sn", Type: field.TypeString, Size: 64, Comment: "工件SN"},
{Name: "flow_id", Type: field.TypeInt, Comment: "完成的工艺ID"},
{Name: "station_no", Type: field.TypeString, Size: 32, Comment: "工位号", Default: ""},
{Name: "order_no", Type: field.TypeString, Size: 64, Default: ""},
{Name: "process_name", Type: field.TypeString, Size: 64, Default: ""},
{Name: "status", Type: field.TypeString, Size: 20, Default: "DONE"},
{Name: "operator", Type: field.TypeString, Size: 64, Default: ""},
{Name: "operator_id", Type: field.TypeInt, Comment: "操作人用户ID(0=未采集:虚拟工位/PLC路径或历史数据)", Default: 0},
{Name: "result", Type: field.TypeString, Size: 10, Comment: "总判定 OK/NG", Default: "OK"},
{Name: "started_at", Type: field.TypeTime, Nullable: true},
{Name: "ended_at", Type: field.TypeTime, Nullable: true},
{Name: "duration_sec", Type: field.TypeInt, Comment: "作业时长(秒)=endedAt-startedAt", Default: 0},
{Name: "remark", Type: field.TypeString, Size: 255, Default: ""},
{Name: "created_at", Type: field.TypeTime},
}
// WorkpieceProcessTable holds the schema information for the "workpiece_process" table.
WorkpieceProcessTable = &schema.Table{
Name: "workpiece_process",
Comment: "WorkpieceProcess 工件-工艺实绩(某工件在某工位完成某道工艺的一次记录,构成工艺时间线)。",
Columns: WorkpieceProcessColumns,
PrimaryKey: []*schema.Column{WorkpieceProcessColumns[0]},
Indexes: []*schema.Index{
{
Name: "workpieceprocess_sn",
Unique: false,
Columns: []*schema.Column{WorkpieceProcessColumns[1]},
},
{
Name: "workpieceprocess_sn_flow_id",
Unique: false,
Columns: []*schema.Column{WorkpieceProcessColumns[1], WorkpieceProcessColumns[2]},
},
{
Name: "workpieceprocess_sn_station_no",
Unique: false,
Columns: []*schema.Column{WorkpieceProcessColumns[1], WorkpieceProcessColumns[3]},
},
{
Name: "workpieceprocess_order_no",
Unique: false,
Columns: []*schema.Column{WorkpieceProcessColumns[4]},
},
{
Name: "workpieceprocess_station_no",
Unique: false,
Columns: []*schema.Column{WorkpieceProcessColumns[3]},
},
},
}
// Tables holds all the tables in the schema.
Tables = []*schema.Table{
AgvPointTable,
AgvTasksTable,
AgvVehicleStateTable,
AlertTable,
AlertRuleTable,
AssociationTraceTable,
AttachmentTable,
BackupRecordTable,
CallPoolTable,
DailyPlanTable,
DockTable,
EventLogTable,
FlowMaterialTable,
InspectionRecordTable,
LinePointTable,
LossLedgersTable,
MaterialsTable,
MaterialQtyReportTable,
MaterialRequestTable,
PermissionTable,
PlcSendLogTable,
ProcessFlowTable,
ProcessStepTable,
ProductProcessTable,
ProductProcessItemTable,
RoleTable,
SemiFlowTable,
ShortageRequestsTable,
StationTable,
StationShiftsTable,
StationStateTable,
StepCriterionTable,
StepDataTable,
StepSignRecordTable,
SysConfigTable,
TorqueRecordTable,
UserTable,
UserStationTable,
WorkOrderTable,
WorkpieceTable,
WorkpieceBindTable,
WorkpieceLifecycleLogTable,
WorkpieceProcessTable,
}
)
func init() {
AgvPointTable.Annotation = &entsql.Annotation{
Table: "agv_point",
}
AgvTasksTable.Annotation = &entsql.Annotation{
Table: "agv_tasks",
}
AgvVehicleStateTable.Annotation = &entsql.Annotation{
Table: "agv_vehicle_state",
}
AlertTable.Annotation = &entsql.Annotation{
Table: "alert",
}
AlertRuleTable.Annotation = &entsql.Annotation{
Table: "alert_rule",
}
AssociationTraceTable.Annotation = &entsql.Annotation{
Table: "association_trace",
}
AttachmentTable.Annotation = &entsql.Annotation{
Table: "attachment",
}
BackupRecordTable.Annotation = &entsql.Annotation{
Table: "backup_record",
}
CallPoolTable.Annotation = &entsql.Annotation{
Table: "call_pool",
}
DailyPlanTable.Annotation = &entsql.Annotation{
Table: "daily_plan",
}
DockTable.Annotation = &entsql.Annotation{
Table: "dock",
}
EventLogTable.Annotation = &entsql.Annotation{
Table: "event_log",
}
FlowMaterialTable.Annotation = &entsql.Annotation{
Table: "flow_material",
}
InspectionRecordTable.Annotation = &entsql.Annotation{
Table: "inspection_record",
}
LinePointTable.Annotation = &entsql.Annotation{
Table: "line_point",
}
LossLedgersTable.Annotation = &entsql.Annotation{
Table: "loss_ledgers",
}
MaterialsTable.Annotation = &entsql.Annotation{
Table: "materials",
}
MaterialQtyReportTable.Annotation = &entsql.Annotation{
Table: "material_qty_report",
}
MaterialRequestTable.Annotation = &entsql.Annotation{
Table: "material_request",
}
PermissionTable.Annotation = &entsql.Annotation{
Table: "permission",
}
PlcSendLogTable.Annotation = &entsql.Annotation{
Table: "plc_send_log",
}
ProcessFlowTable.Annotation = &entsql.Annotation{
Table: "process_flow",
}
ProcessStepTable.Annotation = &entsql.Annotation{
Table: "process_step",
}
ProductProcessTable.Annotation = &entsql.Annotation{
Table: "product_process",
}
ProductProcessItemTable.Annotation = &entsql.Annotation{
Table: "product_process_item",
}
RoleTable.Annotation = &entsql.Annotation{
Table: "role",
}
SemiFlowTable.Annotation = &entsql.Annotation{
Table: "semi_flow",
}
ShortageRequestsTable.Annotation = &entsql.Annotation{
Table: "shortage_requests",
}
StationTable.Annotation = &entsql.Annotation{
Table: "station",
}
StationShiftsTable.Annotation = &entsql.Annotation{
Table: "station_shifts",
}
StationStateTable.Annotation = &entsql.Annotation{
Table: "station_state",
}
StepCriterionTable.Annotation = &entsql.Annotation{
Table: "step_criterion",
}
StepDataTable.Annotation = &entsql.Annotation{
Table: "step_data",
}
StepSignRecordTable.Annotation = &entsql.Annotation{
Table: "step_sign_record",
}
SysConfigTable.Annotation = &entsql.Annotation{
Table: "sys_config",
}
TorqueRecordTable.Annotation = &entsql.Annotation{
Table: "torque_record",
}
UserTable.Annotation = &entsql.Annotation{
Table: "user",
}
UserStationTable.Annotation = &entsql.Annotation{
Table: "user_station",
}
WorkOrderTable.Annotation = &entsql.Annotation{
Table: "work_order",
}
WorkpieceTable.Annotation = &entsql.Annotation{
Table: "workpiece",
}
WorkpieceBindTable.Annotation = &entsql.Annotation{
Table: "workpiece_bind",
}
WorkpieceLifecycleLogTable.Annotation = &entsql.Annotation{
Table: "workpiece_lifecycle_log",
}
WorkpieceProcessTable.Annotation = &entsql.Annotation{
Table: "workpiece_process",
}
}