#include "qualitypage.h" #include "uihelpers.h" #include "../models/qualityrecord.h" #include "../services/qualityservice.h" #include #include #include #include #include #include #include #include #include #include #include #include namespace { QString formatTime(const QDateTime &dateTime) { return dateTime.isValid() ? dateTime.toString("yyyy-MM-dd HH:mm:ss") : "-"; } QString formatDuration(int durationMs) { if (durationMs < 0) { return "-"; } if (durationMs >= 1000) { return QString::number(durationMs / 1000.0, 'f', 2) + " s"; } return QString::number(durationMs) + " ms"; } QString modeText(const QString &mode) { if (mode == "BEFORE_PLATING") { return "镀金前"; } if (mode == "AFTER_PLATING") { return "镀金后"; } return mode.isEmpty() ? "-" : mode; } QString sideText(const QString &side) { if (side == "FRONT") { return "正面"; } if (side == "BACK") { return "反面"; } if (side == "FINAL") { return "最终"; } return side.isEmpty() ? "-" : side; } QString resultText(const QString &result) { if (result == "OK") { return "合格"; } if (result == "NG") { return "不合格"; } if (result == "ERROR") { return "错误"; } if (result == "UNKNOWN") { return "未知"; } return result.isEmpty() ? "-" : result; } QString sourceText(const QString &source) { if (source == "PLC") { return "PLC"; } if (source == "MANUAL") { return "手动"; } if (source == "RECOVERY") { return "恢复"; } return source.isEmpty() ? "-" : source; } QString rawResultText(int rawResult) { return rawResult < 0 ? "-" : QString::number(rawResult); } QLabel *makeValueLabel() { QLabel *label = new QLabel("-"); label->setMinimumWidth(90); label->setStyleSheet("QLabel { font-size: 16px; font-weight: bold; color: #00695c; }"); return label; } void addTableRow(QTableWidget *table, const QStringList &values) { const int row = table->rowCount(); table->insertRow(row); for (int column = 0; column < values.size(); ++column) { table->setItem(row, column, new QTableWidgetItem(values.at(column))); } } } QualityPage::QualityPage(QWidget *parent) : QWidget(parent) , inspectionOrderEdit(nullptr) , inspectionBarcodeEdit(nullptr) , inspectionTrayEdit(nullptr) , inspectionSlotEdit(nullptr) , inspectionModeCombo(nullptr) , inspectionSideCombo(nullptr) , inspectionResultCombo(nullptr) , inspectionTable(nullptr) , inspectionMessageLabel(nullptr) , statisticsOrderEdit(nullptr) , planValueLabel(nullptr) , completedValueLabel(nullptr) , pendingValueLabel(nullptr) , okValueLabel(nullptr) , ngValueLabel(nullptr) , rateValueLabel(nullptr) , inspectionCountValueLabel(nullptr) , statisticsMessageLabel(nullptr) , sideStatisticsTable(nullptr) , traceBarcodeEdit(nullptr) , traceInfoLabel(nullptr) , traceMessageLabel(nullptr) , traceInspectionTable(nullptr) , traceProcessTable(nullptr) , traceHistoryTable(nullptr) { QVBoxLayout *layout = new QVBoxLayout(this); layout->setContentsMargins(14, 14, 14, 14); layout->setSpacing(10); QTabWidget *tabs = new QTabWidget(this); layout->addWidget(tabs); setupInspectionTab(); setupStatisticsTab(); setupTraceTab(); QWidget *inspectionTab = new QWidget; QVBoxLayout *inspectionLayout = new QVBoxLayout(inspectionTab); inspectionLayout->setContentsMargins(8, 8, 8, 8); inspectionLayout->setSpacing(8); QGridLayout *filters = new QGridLayout; filters->setHorizontalSpacing(8); filters->setVerticalSpacing(6); filters->addWidget(new QLabel("订单号"), 0, 0); filters->addWidget(inspectionOrderEdit, 0, 1); filters->addWidget(new QLabel("工件条码"), 0, 2); filters->addWidget(inspectionBarcodeEdit, 0, 3); filters->addWidget(new QLabel("托盘"), 0, 4); filters->addWidget(inspectionTrayEdit, 0, 5); filters->addWidget(new QLabel("位置号"), 0, 6); filters->addWidget(inspectionSlotEdit, 0, 7); filters->addWidget(new QLabel("检测模式"), 1, 0); filters->addWidget(inspectionModeCombo, 1, 1); filters->addWidget(new QLabel("检测面"), 1, 2); filters->addWidget(inspectionSideCombo, 1, 3); filters->addWidget(new QLabel("结果"), 1, 4); filters->addWidget(inspectionResultCombo, 1, 5); QPushButton *inspectionQueryButton = new QPushButton("查询"); filters->addWidget(inspectionQueryButton, 1, 7); inspectionLayout->addLayout(filters); inspectionLayout->addWidget(inspectionMessageLabel); inspectionLayout->addWidget(inspectionTable, 1); tabs->addTab(inspectionTab, "检测记录"); QWidget *statisticsTab = new QWidget; QVBoxLayout *statisticsLayout = new QVBoxLayout(statisticsTab); statisticsLayout->setContentsMargins(8, 8, 8, 8); statisticsLayout->setSpacing(8); QHBoxLayout *statisticsFilters = new QHBoxLayout; statisticsFilters->addWidget(new QLabel("订单号")); statisticsFilters->addWidget(statisticsOrderEdit); QPushButton *statisticsQueryButton = new QPushButton("查询"); statisticsFilters->addWidget(statisticsQueryButton); statisticsFilters->addStretch(); statisticsLayout->addLayout(statisticsFilters); statisticsLayout->addWidget(statisticsMessageLabel); QGroupBox *summaryBox = new QGroupBox("订单质量汇总"); QGridLayout *summaryLayout = new QGridLayout(summaryBox); summaryLayout->addWidget(new QLabel("计划数量"), 0, 0); summaryLayout->addWidget(planValueLabel, 0, 1); summaryLayout->addWidget(new QLabel("已完成"), 0, 2); summaryLayout->addWidget(completedValueLabel, 0, 3); summaryLayout->addWidget(new QLabel("未完成"), 0, 4); summaryLayout->addWidget(pendingValueLabel, 0, 5); summaryLayout->addWidget(new QLabel("合格"), 1, 0); summaryLayout->addWidget(okValueLabel, 1, 1); summaryLayout->addWidget(new QLabel("不合格"), 1, 2); summaryLayout->addWidget(ngValueLabel, 1, 3); summaryLayout->addWidget(new QLabel("合格率"), 1, 4); summaryLayout->addWidget(rateValueLabel, 1, 5); summaryLayout->addWidget(new QLabel("检测记录数"), 2, 0); summaryLayout->addWidget(inspectionCountValueLabel, 2, 1); statisticsLayout->addWidget(summaryBox); statisticsLayout->addWidget(sideStatisticsTable, 1); tabs->addTab(statisticsTab, "合格率统计"); QWidget *traceTab = new QWidget; QVBoxLayout *traceLayout = new QVBoxLayout(traceTab); traceLayout->setContentsMargins(8, 8, 8, 8); traceLayout->setSpacing(8); QHBoxLayout *traceFilters = new QHBoxLayout; traceFilters->addWidget(new QLabel("工件条码")); traceFilters->addWidget(traceBarcodeEdit); QPushButton *traceQueryButton = new QPushButton("查询"); traceFilters->addWidget(traceQueryButton); traceFilters->addStretch(); traceLayout->addLayout(traceFilters); traceLayout->addWidget(traceInfoLabel); traceLayout->addWidget(traceMessageLabel); QGroupBox *traceInspectionBox = new QGroupBox("检测记录"); QVBoxLayout *traceInspectionLayout = new QVBoxLayout(traceInspectionBox); traceInspectionLayout->addWidget(traceInspectionTable); QGroupBox *traceProcessBox = new QGroupBox("工序记录"); QVBoxLayout *traceProcessLayout = new QVBoxLayout(traceProcessBox); traceProcessLayout->addWidget(traceProcessTable); QGroupBox *traceHistoryBox = new QGroupBox("状态历史"); QVBoxLayout *traceHistoryLayout = new QVBoxLayout(traceHistoryBox); traceHistoryLayout->addWidget(traceHistoryTable); QSplitter *traceSplitter = new QSplitter(Qt::Vertical); traceSplitter->addWidget(traceInspectionBox); traceSplitter->addWidget(traceProcessBox); traceSplitter->addWidget(traceHistoryBox); traceLayout->addWidget(traceSplitter, 1); tabs->addTab(traceTab, "工件追溯"); connect(inspectionQueryButton, &QPushButton::clicked, this, &QualityPage::loadInspectionRecords); connect(inspectionSlotEdit, &QLineEdit::returnPressed, this, &QualityPage::loadInspectionRecords); connect(statisticsQueryButton, &QPushButton::clicked, this, &QualityPage::loadStatistics); connect(statisticsOrderEdit, &QLineEdit::returnPressed, this, &QualityPage::loadStatistics); connect(traceQueryButton, &QPushButton::clicked, this, &QualityPage::loadTrace); connect(traceBarcodeEdit, &QLineEdit::returnPressed, this, &QualityPage::loadTrace); loadInspectionRecords(); loadStatistics(); } QualityPage::~QualityPage() { } void QualityPage::refresh() { loadInspectionRecords(); loadStatistics(); if (!traceBarcodeEdit->text().trimmed().isEmpty()) { loadTrace(); } } void QualityPage::setupInspectionTab() { inspectionOrderEdit = new QLineEdit; inspectionOrderEdit->setPlaceholderText("支持模糊查询"); inspectionBarcodeEdit = new QLineEdit; inspectionBarcodeEdit->setPlaceholderText("支持模糊查询"); inspectionTrayEdit = new QLineEdit; inspectionTrayEdit->setPlaceholderText("如 TRAY-1"); inspectionSlotEdit = new QLineEdit; inspectionSlotEdit->setPlaceholderText("1-49"); inspectionModeCombo = new QComboBox; inspectionModeCombo->addItem("全部", ""); inspectionModeCombo->addItem("镀金前", "BEFORE_PLATING"); inspectionModeCombo->addItem("镀金后", "AFTER_PLATING"); inspectionSideCombo = new QComboBox; inspectionSideCombo->addItem("全部", ""); inspectionSideCombo->addItem("正面", "FRONT"); inspectionSideCombo->addItem("反面", "BACK"); inspectionSideCombo->addItem("最终", "FINAL"); inspectionResultCombo = new QComboBox; inspectionResultCombo->addItem("全部", ""); inspectionResultCombo->addItem("合格", "OK"); inspectionResultCombo->addItem("不合格", "NG"); inspectionResultCombo->addItem("错误", "ERROR"); inspectionResultCombo->addItem("未知", "UNKNOWN"); inspectionTable = UiHelpers::makeTable( QStringList() << "时间" << "订单号" << "工件条码" << "托盘" << "位置" << "模式" << "检测面" << "结果" << "原始结果" << "来源" << "耗时" << "次数"); const int dateTimeWidth = UiHelpers::textColumnWidth( inspectionTable, "2026-10-30 23:59:59"); UiHelpers::configureTableColumns( inspectionTable, QList() << dateTimeWidth << 110 << 150 << 85 << 65 << 90 << 75 << 75 << 85 << 90 << 90 << 65); inspectionMessageLabel = new QLabel; } void QualityPage::setupStatisticsTab() { statisticsOrderEdit = new QLineEdit; statisticsOrderEdit->setPlaceholderText("留空统计全部订单"); planValueLabel = makeValueLabel(); completedValueLabel = makeValueLabel(); pendingValueLabel = makeValueLabel(); okValueLabel = makeValueLabel(); ngValueLabel = makeValueLabel(); rateValueLabel = makeValueLabel(); inspectionCountValueLabel = makeValueLabel(); statisticsMessageLabel = new QLabel; sideStatisticsTable = UiHelpers::makeTable( QStringList() << "检测面" << "合格" << "不合格" << "记录数"); UiHelpers::configureTableColumns( sideStatisticsTable, QList() << 120 << 100 << 100 << 110); addTableRow(sideStatisticsTable, QStringList() << "正面" << "-" << "-" << "-"); addTableRow(sideStatisticsTable, QStringList() << "反面" << "-" << "-" << "-"); } void QualityPage::setupTraceTab() { traceBarcodeEdit = new QLineEdit; traceBarcodeEdit->setPlaceholderText("输入完整工件条码"); traceInfoLabel = new QLabel("请输入工件条码查询生产追溯信息"); traceInfoLabel->setWordWrap(true); traceMessageLabel = new QLabel; traceInspectionTable = UiHelpers::makeTable( QStringList() << "时间" << "模式" << "检测面" << "结果" << "原始结果" << "来源" << "耗时" << "次数"); const int dateTimeWidth = UiHelpers::textColumnWidth( traceInspectionTable, "2026-10-30 23:59:59"); UiHelpers::configureTableColumns( traceInspectionTable, QList() << dateTimeWidth << 90 << 75 << 75 << 85 << 90 << 90 << 65); traceProcessTable = UiHelpers::makeTable( QStringList() << "开始时间" << "工序" << "状态" << "结果" << "来源" << "PLC步骤" << "耗时" << "次数"); UiHelpers::configureTableColumns( traceProcessTable, QList() << dateTimeWidth << 130 << 100 << 80 << 90 << 80 << 90 << 65); traceHistoryTable = UiHelpers::makeTable( QStringList() << "时间" << "状态变化" << "工序" << "来源" << "原因" << "耗时" << "说明"); UiHelpers::configureTableColumns( traceHistoryTable, QList() << dateTimeWidth << 150 << 120 << 90 << 160 << 90 << 200); } void QualityPage::loadInspectionRecords() { const QString slotText = inspectionSlotEdit->text().trimmed(); bool slotOk = true; const int trayPos = slotText.isEmpty() ? 0 : slotText.toInt(&slotOk); if (!slotText.isEmpty() && (!slotOk || trayPos < 1 || trayPos > 49)) { setMessage(inspectionMessageLabel, "位置号必须是 1 到 49", true); return; } QString error; const QList records = QualityService::instance().listInspectionRecords( inspectionOrderEdit->text(), inspectionBarcodeEdit->text(), inspectionTrayEdit->text(), trayPos, inspectionModeCombo->currentData().toString(), inspectionSideCombo->currentData().toString(), inspectionResultCombo->currentData().toString(), &error); clearTable(inspectionTable); if (!error.isEmpty()) { setMessage(inspectionMessageLabel, "查询失败: " + error, true); return; } for (const InspectionRecord &record : records) { addTableRow(inspectionTable, QStringList() << formatTime(record.completedAt.isValid() ? record.completedAt : record.createdAt) << record.orderNo << record.barcode << record.trayCode << QString::number(record.trayPos) << modeText(record.inspectionMode) << sideText(record.inspectionSide) << resultText(record.resultState) << rawResultText(record.rawResult) << sourceText(record.source) << formatDuration(record.durationMs) << QString::number(record.attemptNo)); } setMessage(inspectionMessageLabel, QString("共 %1 条检测记录").arg(records.size()), false); } void QualityPage::loadStatistics() { QualityStatistics statistics; QString error; if (!QualityService::instance().queryStatistics( statisticsOrderEdit->text(), &statistics, &error)) { planValueLabel->setText("-"); completedValueLabel->setText("-"); pendingValueLabel->setText("-"); okValueLabel->setText("-"); ngValueLabel->setText("-"); rateValueLabel->setText("-"); inspectionCountValueLabel->setText("-"); setMessage(statisticsMessageLabel, "查询失败: " + error, true); return; } planValueLabel->setText(QString::number(statistics.planNum)); completedValueLabel->setText(QString::number(statistics.completedCount)); pendingValueLabel->setText(QString::number(statistics.pendingCount)); okValueLabel->setText(QString::number(statistics.okCount)); ngValueLabel->setText(QString::number(statistics.ngCount)); rateValueLabel->setText(QString::number(statistics.qualifiedRate, 'f', 2) + "%"); inspectionCountValueLabel->setText(QString::number(statistics.inspectionCount)); sideStatisticsTable->setItem(0, 1, new QTableWidgetItem(QString::number(statistics.frontOkCount))); sideStatisticsTable->setItem(0, 2, new QTableWidgetItem(QString::number(statistics.frontNgCount))); sideStatisticsTable->setItem(0, 3, new QTableWidgetItem(QString::number( statistics.frontOkCount + statistics.frontNgCount))); sideStatisticsTable->setItem(1, 1, new QTableWidgetItem(QString::number(statistics.backOkCount))); sideStatisticsTable->setItem(1, 2, new QTableWidgetItem(QString::number(statistics.backNgCount))); sideStatisticsTable->setItem(1, 3, new QTableWidgetItem(QString::number( statistics.backOkCount + statistics.backNgCount))); setMessage(statisticsMessageLabel, "统计完成", false); } void QualityPage::loadTrace() { const QString barcode = traceBarcodeEdit->text().trimmed(); if (barcode.isEmpty()) { setMessage(traceMessageLabel, "请输入工件条码", true); return; } Workpiece workpiece; Order order; QList inspections; QList processRecords; QList stateHistory; QString error; if (!QualityService::instance().findWorkpieceTrace( barcode, &workpiece, &order, &inspections, &processRecords, &stateHistory, &error)) { traceInfoLabel->setText("未找到工件追溯信息"); clearTable(traceInspectionTable); clearTable(traceProcessTable); clearTable(traceHistoryTable); setMessage(traceMessageLabel, "查询失败: " + error, true); return; } traceInfoLabel->setText( QString("工件:%1 订单:%2 托盘:%3 位置:%4 状态:%5 当前工序:%6 检测模式:%7") .arg(workpiece.barcode) .arg(order.no) .arg(workpiece.trayCode.isEmpty() ? QString::number(workpiece.trayId) : workpiece.trayCode) .arg(workpiece.trayPos) .arg(resultText(workpiece.state)) .arg(workpiece.processStep.isEmpty() ? "-" : workpiece.processStep) .arg(modeText(order.inspectionMode))); clearTable(traceInspectionTable); for (const InspectionRecord &record : inspections) { addTableRow(traceInspectionTable, QStringList() << formatTime(record.completedAt.isValid() ? record.completedAt : record.createdAt) << modeText(record.inspectionMode) << sideText(record.inspectionSide) << resultText(record.resultState) << rawResultText(record.rawResult) << sourceText(record.source) << formatDuration(record.durationMs) << QString::number(record.attemptNo)); } clearTable(traceProcessTable); for (const QualityProcessRecord &record : processRecords) { addTableRow(traceProcessTable, QStringList() << formatTime(record.startedAt) << record.processStep << record.processState << resultText(record.resultState) << sourceText(record.source) << QString::number(record.plcStep) << formatDuration(record.durationMs) << QString::number(record.attemptNo)); } clearTable(traceHistoryTable); for (const QualityStateHistory &history : stateHistory) { addTableRow(traceHistoryTable, QStringList() << formatTime(history.changedAt) << (history.fromState.isEmpty() ? history.toState : history.fromState + " -> " + history.toState) << history.processStep << sourceText(history.source) << history.reason << formatDuration(history.elapsedMs) << history.message); } setMessage(traceMessageLabel, QString("检测记录 %1 条,工序记录 %2 条,状态历史 %3 条") .arg(inspections.size()).arg(processRecords.size()).arg(stateHistory.size()), false); } void QualityPage::setMessage(QLabel *label, const QString &message, bool error) { label->setText(message); label->setStyleSheet(error ? "QLabel { color: #c62828; }" : "QLabel { color: #546e7a; }"); } void QualityPage::clearTable(QTableWidget *table) { table->setRowCount(0); }