#include "deviceservice.h" #include "../config/configmanager.h" #include "../modbus/modbustcpmanager.h" #include namespace { const int FeedbackPollIntervalMs = 50; bool actionAddresses(DeviceService::ProductionAction action, const ModbusAddressMap &addresses, int *commandAddress, int *feedbackAddress) { if (!commandAddress || !feedbackAddress) { return false; } switch (action) { case DeviceService::RackPick: *commandAddress = addresses.rackPickCommand; *feedbackAddress = addresses.rackPickFeedback; return true; case DeviceService::FrontLoad: *commandAddress = addresses.frontLoadCommand; *feedbackAddress = addresses.frontLoadFeedback; return true; case DeviceService::Inspect: *commandAddress = addresses.inspectionCommand; *feedbackAddress = addresses.inspectionFeedback; return true; case DeviceService::FrontUnload: *commandAddress = addresses.frontUnloadCommand; *feedbackAddress = addresses.frontUnloadFeedback; return true; case DeviceService::Flip: *commandAddress = addresses.flipCommand; *feedbackAddress = addresses.flipFeedback; return true; case DeviceService::BackLoad: *commandAddress = addresses.backLoadCommand; *feedbackAddress = addresses.backLoadFeedback; return true; case DeviceService::BackUnload: *commandAddress = addresses.backUnloadCommand; *feedbackAddress = addresses.backUnloadFeedback; return true; case DeviceService::RackPlace: *commandAddress = addresses.rackPlaceCommand; *feedbackAddress = addresses.rackPlaceFeedback; return true; } return false; } } DeviceService::DeviceService(QObject *parent) : QObject(parent) , m_pollTimer(new QTimer(this)) , m_modbus(new ModbusTcpManager( ConfigManager::instance().modbusConfig(), this)) , m_statusRequestPending(false) , m_controlRequestPending(false) , m_productionActionActive(false) , m_productionActionBusy(false) , m_productionCommandAddress(-1) , m_productionFeedbackAddress(-1) , m_terminationActive(false) , m_terminationSignalIndex(0) , m_controlCommandAddress(-1) , m_controlFeedbackAddress(-1) { connect(m_pollTimer, &QTimer::timeout, this, &DeviceService::pollStatus); } void DeviceService::startPolling() { if (m_terminationActive) { return; } if (m_pollTimer->isActive()) { return; } const int interval = qMax(100, m_modbus->config().pollIntervalMs); m_pollTimer->start(interval); pollStatus(); } void DeviceService::stopPolling() { m_pollTimer->stop(); } bool DeviceService::isPolling() const { return m_pollTimer->isActive(); } void DeviceService::requestStatus(const StatusCallback &callback) { if (m_terminationActive) { if (callback) { DeviceStatus status; callback(false, status, "PLC termination is in progress"); } return; } if (ConfigManager::instance().simulationMode()) { const DeviceStatus status = simulatedStatus(); emit statusChanged(status); if (callback) { callback(true, status, QString()); } return; } if (m_statusRequestPending) { if (callback) { m_statusCallbacks.append(callback); } return; } m_statusRequestPending = true; m_statusCallbacks.clear(); if (callback) { m_statusCallbacks.append(callback); } DeviceStatus status; status.plcConnected = true; readStatusStep(0, status); } void DeviceService::finishStatusRequest(bool success, const DeviceStatus &status, const QString &error) { DeviceStatus finalStatus = status; finalStatus.statusValid = success; if (success) { finalStatus.safetyDoorClosed = finalStatus.safetyDoorClosed && finalStatus.safetyDoor1Closed && finalStatus.safetyDoor2Closed && finalStatus.safetyDoor3Closed; } m_statusRequestPending = false; const QList callbacks = m_statusCallbacks; m_statusCallbacks.clear(); emit statusChanged(finalStatus); if (!success && !error.isEmpty()) { emit communicationError(error); } for (const StatusCallback &callback : callbacks) { if (callback) { callback(success, finalStatus, error); } } } void DeviceService::readStatusStep(int index, const DeviceStatus &status) { const bool useErrorCode = ConfigManager::instance().productionConfig().usePlcErrorCode; if (index >= (useErrorCode ? 15 : 14)) { finishStatusRequest(true, status, QString()); return; } auto failed = [this](const QString &error) { DeviceStatus status; status.plcConnected = false; finishStatusRequest( false, status, error.isEmpty() ? "Failed to read PLC status" : error); }; auto next = [this, index, status, failed]( bool success, quint16 value, const QString &error) { if (!success) { failed(error); return; } DeviceStatus nextStatus = status; switch (index) { case 0: nextStatus.plcReady = value != 0; break; case 1: nextStatus.robotReady = value != 0; break; case 2: nextStatus.safetyDoorClosed = value != 0; break; case 3: nextStatus.emergencyStop = value != 0; break; case 4: nextStatus.inspectionMachineReady = value != 0; break; case 5: nextStatus.visionReady = value != 0; break; case 6: nextStatus.robotControlCabinetReady = value != 0; break; case 7: nextStatus.mainControlCabinetReady = value != 0; break; case 8: nextStatus.safetyDoor1Closed = value != 0; break; case 9: nextStatus.safetyDoor2Closed = value != 0; break; case 10: nextStatus.safetyDoor3Closed = value != 0; break; case 11: nextStatus.activeAlarm = value != 0; break; case 12: nextStatus.currentStep = value; break; case 13: nextStatus.checkResult = value; break; case 14: nextStatus.errorCode = value; break; default: break; } readStatusStep(index + 1, nextStatus); }; const ModbusAddressMap &addresses = m_modbus->config().addressMap; switch (index) { case 0: m_modbus->readCoil(addresses.plcReady, [next](bool ok, bool value, const QString &error) { next(ok, value ? 1 : 0, error); }); break; case 1: m_modbus->readCoil(addresses.robotReady, [next](bool ok, bool value, const QString &error) { next(ok, value ? 1 : 0, error); }); break; case 2: m_modbus->readCoil(addresses.safetyDoorClosed, [next](bool ok, bool value, const QString &error) { next(ok, value ? 1 : 0, error); }); break; case 3: m_modbus->readCoil(addresses.emergencyStop, [next](bool ok, bool value, const QString &error) { next(ok, value ? 1 : 0, error); }); break; case 4: m_modbus->readCoil(addresses.inspectionMachineReady, [next](bool ok, bool value, const QString &error) { next(ok, value ? 1 : 0, error); }); break; case 5: m_modbus->readCoil(addresses.visionReady, [next](bool ok, bool value, const QString &error) { next(ok, value ? 1 : 0, error); }); break; case 6: m_modbus->readCoil(addresses.robotControlCabinetReady, [next](bool ok, bool value, const QString &error) { next(ok, value ? 1 : 0, error); }); break; case 7: m_modbus->readCoil(addresses.mainControlCabinetReady, [next](bool ok, bool value, const QString &error) { next(ok, value ? 1 : 0, error); }); break; case 8: m_modbus->readCoil(addresses.safetyDoor1Closed, [next](bool ok, bool value, const QString &error) { next(ok, value ? 1 : 0, error); }); break; case 9: m_modbus->readCoil(addresses.safetyDoor2Closed, [next](bool ok, bool value, const QString &error) { next(ok, value ? 1 : 0, error); }); break; case 10: m_modbus->readCoil(addresses.safetyDoor3Closed, [next](bool ok, bool value, const QString &error) { next(ok, value ? 1 : 0, error); }); break; case 11: m_modbus->readCoil(addresses.activeAlarm, [next](bool ok, bool value, const QString &error) { next(ok, value ? 1 : 0, error); }); break; case 12: m_modbus->readHoldingRegister(addresses.currentStep, next); break; case 13: m_modbus->readHoldingRegister(addresses.checkResult, next); break; case 14: if (useErrorCode) { m_modbus->readHoldingRegister(addresses.errorCode, next); } else { finishStatusRequest(true, status, QString()); } break; } } void DeviceService::pollStatus() { if (m_terminationActive || m_statusRequestPending || m_controlRequestPending || m_productionActionBusy) { return; } requestStatus([this](bool success, const DeviceStatus &, const QString &error) { if (!success && !error.isEmpty()) { emit communicationError(error); } }); } DeviceStatus DeviceService::simulatedStatus() const { DeviceStatus status; status.statusValid = true; status.plcConnected = true; status.plcReady = true; status.robotReady = true; status.safetyDoorClosed = true; status.emergencyStop = false; status.inspectionMachineReady = true; status.visionReady = true; status.robotControlCabinetReady = true; status.mainControlCabinetReady = true; status.safetyDoor1Closed = true; status.safetyDoor2Closed = true; status.safetyDoor3Closed = true; status.activeAlarm = false; status.currentStep = 0; status.checkResult = 0; return status; } void DeviceService::start(const OperationCallback &callback) { if (m_terminationActive) { if (callback) { callback(false, "PLC termination is in progress"); } return; } if (ConfigManager::instance().simulationMode()) { if (callback) { callback(true, QString()); } return; } if (!ConfigManager::instance().productionEnabled()) { if (callback) { callback(false, "Production control is disabled by configuration"); } return; } const ModbusAddressMap &addresses = m_modbus->config().addressMap; executeCommand(addresses.startCommand, addresses.startFeedback, callback); } void DeviceService::pause(const OperationCallback &callback) { if (m_terminationActive) { if (callback) { callback(false, "PLC termination is in progress"); } return; } if (ConfigManager::instance().simulationMode()) { if (callback) { callback(true, QString()); } return; } if (!ConfigManager::instance().productionEnabled()) { if (callback) { callback(false, "Production control is disabled by configuration"); } return; } const ModbusAddressMap &addresses = m_modbus->config().addressMap; executeCommand(addresses.pauseCommand, addresses.pauseFeedback, callback); } void DeviceService::reset(const OperationCallback &callback) { if (m_terminationActive) { if (callback) { callback(false, "PLC termination is in progress"); } return; } if (ConfigManager::instance().simulationMode()) { if (callback) { callback(true, QString()); } return; } if (!ConfigManager::instance().productionEnabled()) { if (callback) { callback(false, "Production control is disabled by configuration"); } return; } const ModbusAddressMap &addresses = m_modbus->config().addressMap; executeCommand(addresses.resetCommand, addresses.resetFeedback, callback); } void DeviceService::clearAlarm(const OperationCallback &callback) { if (m_terminationActive) { if (callback) { callback(false, "PLC termination is in progress"); } return; } if (ConfigManager::instance().simulationMode()) { if (callback) { callback(true, QString()); } return; } if (!ConfigManager::instance().productionEnabled()) { if (callback) { callback(false, "Production control is disabled by configuration"); } return; } const ModbusAddressMap &addresses = m_modbus->config().addressMap; executeCommand(addresses.clearAlarmCommand, addresses.clearAlarmFeedback, callback); } void DeviceService::setInspectionMode(const QString &mode, const OperationCallback &callback) { if (mode != "BEFORE_PLATING" && mode != "AFTER_PLATING") { if (callback) { callback(false, "Inspection mode must be BEFORE_PLATING or AFTER_PLATING"); } return; } if (m_terminationActive) { if (callback) { callback(false, "PLC termination is in progress"); } return; } if (ConfigManager::instance().simulationMode()) { if (callback) { callback(true, QString()); } return; } if (!ConfigManager::instance().productionEnabled()) { if (callback) { callback(false, "Production control is disabled by configuration"); } return; } if (m_controlRequestPending || m_productionActionBusy) { if (callback) { callback(false, "Another PLC operation is already active"); } return; } m_controlRequestPending = true; const bool afterPlating = mode == "AFTER_PLATING"; m_modbus->writeCoil( m_modbus->config().addressMap.inspectionMode, afterPlating, [this, callback](bool success, const QString &error) { m_controlRequestPending = false; if (callback) { callback(success, error); } }); } void DeviceService::terminate(const OperationCallback &callback) { if (m_terminationActive) { if (callback) { callback(false, "PLC termination is already in progress"); } return; } m_terminationActive = true; m_terminationCallback = callback; m_terminationSignals.clear(); m_terminationSignalIndex = 0; m_pollTimer->stop(); const QList> currentSignals = QList>() << qMakePair(m_controlCommandAddress, m_controlFeedbackAddress) << qMakePair(m_productionCommandAddress, m_productionFeedbackAddress); for (const QPair &signalPair : currentSignals) { if (signalPair.first >= 0 && signalPair.second >= 0 && !m_terminationSignals.contains(signalPair)) { m_terminationSignals.append(signalPair); } } m_modbus->abortAll("PLC termination requested"); m_statusRequestPending = false; m_controlRequestPending = false; m_productionActionActive = false; m_productionActionBusy = false; if (ConfigManager::instance().simulationMode() || !ConfigManager::instance().productionEnabled()) { finishTermination(true, QString()); return; } clearNextTerminationSignal(); } void DeviceService::clearNextTerminationSignal() { if (!m_terminationActive) { return; } if (m_terminationSignalIndex >= m_terminationSignals.size()) { const ModbusAddressMap &addresses = m_modbus->config().addressMap; executeCommand( addresses.pauseCommand, addresses.pauseFeedback, [this](bool success, const QString &error) { if (!success) { finishTermination(false, error); return; } finishTermination(true, QString()); }, true); return; } const QPair signalPair = m_terminationSignals.at(m_terminationSignalIndex++); clearSignals( signalPair.first, signalPair.second, [this](bool success, const QString &error) { if (!success) { finishTermination(false, error); return; } clearNextTerminationSignal(); }); } void DeviceService::finishTermination(bool success, const QString &error) { if (!m_terminationActive) { return; } const OperationCallback callback = m_terminationCallback; m_terminationCallback = OperationCallback(); m_terminationActive = false; m_terminationSignals.clear(); m_terminationSignalIndex = 0; m_controlRequestPending = false; m_productionActionActive = false; m_productionActionBusy = false; if (success) { m_controlCommandAddress = -1; m_controlFeedbackAddress = -1; m_productionCommandAddress = -1; m_productionFeedbackAddress = -1; } if (callback) { callback(success, error); } } void DeviceService::executeCommand(int commandAddress, int feedbackAddress, const OperationCallback &callback, bool allowDuringTermination) { if (m_terminationActive && !allowDuringTermination) { if (callback) { callback(false, "PLC termination is in progress"); } return; } if (m_controlRequestPending || m_productionActionBusy) { if (callback) { callback(false, "Another PLC operation is already active"); } return; } m_controlRequestPending = true; m_controlCommandAddress = commandAddress; m_controlFeedbackAddress = feedbackAddress; writeCommandAndWaitFeedback(commandAddress, feedbackAddress, [this, commandAddress, feedbackAddress, callback](bool success, const QString &error) { m_controlRequestPending = false; if (success && m_controlCommandAddress == commandAddress && m_controlFeedbackAddress == feedbackAddress) { m_controlCommandAddress = -1; m_controlFeedbackAddress = -1; } if (callback) { callback(success, error); } }, allowDuringTermination); } void DeviceService::writeCommandAndWaitFeedback( int commandAddress, int feedbackAddress, const OperationCallback &callback, bool allowDuringTermination) { if (m_terminationActive && !allowDuringTermination) { if (callback) { callback(false, "PLC termination is in progress"); } return; } m_modbus->writeCoil( commandAddress, true, [this, commandAddress, feedbackAddress, callback, allowDuringTermination](bool success, const QString &error) { if (!success) { if (callback) { callback(false, error); } return; } pollFeedback(commandAddress, feedbackAddress, callback, allowDuringTermination); }); } void DeviceService::pollFeedback(int commandAddress, int feedbackAddress, const OperationCallback &callback, bool allowDuringTermination) { if (m_terminationActive && !allowDuringTermination) { if (callback) { callback(false, "PLC termination is in progress"); } return; } m_modbus->readCoil( feedbackAddress, [this, commandAddress, feedbackAddress, callback, allowDuringTermination]( bool success, bool feedback, const QString &error) { if (!success) { if (callback) { callback(false, error); } return; } if (!feedback) { QTimer::singleShot( FeedbackPollIntervalMs, this, [this, commandAddress, feedbackAddress, callback, allowDuringTermination]() { pollFeedback(commandAddress, feedbackAddress, callback, allowDuringTermination); }); return; } clearSignals(commandAddress, feedbackAddress, [callback](bool cleared, const QString &clearError) { if (callback) { callback(cleared, clearError); } }); }); } void DeviceService::beginProductionAction( ProductionAction action, int trayNo, int slotNo, const OperationCallback &callback) { if (m_terminationActive) { if (callback) { callback(false, "PLC termination is in progress"); } return; } if (ConfigManager::instance().simulationMode()) { if (callback) { callback(true, QString()); } return; } if (!ConfigManager::instance().productionEnabled()) { if (callback) { callback(false, "Production control is disabled by configuration"); } return; } if (m_productionActionActive || m_productionActionBusy) { if (callback) { callback(false, "A PLC production action is already active"); } return; } if (trayNo <= 0 || slotNo < 1 || slotNo > 49) { if (callback) { callback(false, "PLC tray or slot position is invalid"); } return; } const ModbusAddressMap &addresses = m_modbus->config().addressMap; if (!actionAddresses(action, addresses, &m_productionCommandAddress, &m_productionFeedbackAddress)) { if (callback) { callback(false, "Unknown PLC production action"); } return; } m_productionActionBusy = true; m_modbus->readCoil( m_productionFeedbackAddress, [this, action, trayNo, slotNo, addresses, callback]( bool success, bool feedback, const QString &error) { if (!success) { m_productionActionBusy = false; if (callback) { callback(false, error); } return; } if (feedback) { m_productionActionBusy = false; if (callback) { callback(false, "PLC feedback is still active before a new action"); } return; } auto sendCommand = [this, callback](bool success, const QString &error) { if (!success) { m_productionActionBusy = false; if (callback) { callback(false, error); } return; } m_productionActionActive = true; m_productionActionBusy = false; if (callback) { callback(true, QString()); } }; auto writeCommand = [this, sendCommand](bool success, const QString &error) { if (!success) { sendCommand(false, error); return; } m_modbus->writeCoil( m_productionCommandAddress, true, sendCommand); }; if (action == RackPick || action == RackPlace) { m_modbus->writeHoldingRegister( addresses.trayNumber, static_cast(trayNo), [this, addresses, slotNo, writeCommand]( bool traySuccess, const QString &trayError) { if (!traySuccess) { writeCommand(false, trayError); return; } m_modbus->writeHoldingRegister( addresses.slotNumber, static_cast(slotNo), writeCommand); }); return; } writeCommand(true, QString()); }); } void DeviceService::pollProductionAction(const ActionCallback &callback) { if (m_terminationActive) { if (callback) { callback(false, false, "PLC termination is in progress"); } return; } if (ConfigManager::instance().simulationMode()) { if (callback) { callback(true, true, QString()); } return; } if (m_productionActionBusy) { if (callback) { callback(true, false, QString()); } return; } if (!m_productionActionActive) { if (callback) { callback(false, false, "No PLC production action is active"); } return; } m_productionActionBusy = true; m_modbus->readCoil( m_productionFeedbackAddress, [this, callback](bool success, bool feedback, const QString &error) { if (!success) { m_productionActionBusy = false; if (callback) { callback(false, false, error); } return; } if (!feedback) { m_productionActionBusy = false; if (callback) { callback(true, false, QString()); } return; } clearActionSignals( [this, callback](bool cleared, const QString &clearError) { m_productionActionBusy = false; if (cleared) { m_productionActionActive = false; m_productionCommandAddress = -1; m_productionFeedbackAddress = -1; if (callback) { callback(true, true, QString()); } } else if (callback) { callback(false, false, clearError); } }); }); } void DeviceService::cancelProductionAction(const OperationCallback &callback) { if (m_terminationActive) { if (callback) { callback(false, "PLC termination is in progress"); } return; } if (ConfigManager::instance().simulationMode() || (!m_productionActionActive && !m_productionActionBusy)) { m_productionActionActive = false; m_productionActionBusy = false; if (callback) { callback(true, QString()); } return; } if (m_productionActionBusy) { if (callback) { callback(false, "PLC production action is busy"); } return; } m_productionActionBusy = true; clearActionSignals( [this, callback](bool cleared, const QString &error) { m_productionActionBusy = false; if (cleared) { m_productionActionActive = false; m_productionCommandAddress = -1; m_productionFeedbackAddress = -1; } if (callback) { callback(cleared, error); } }); } void DeviceService::clearActionSignals(const OperationCallback &callback) { if (m_productionCommandAddress < 0 || m_productionFeedbackAddress < 0) { if (callback) { callback(false, "PLC production action addresses are invalid"); } return; } clearSignals(m_productionCommandAddress, m_productionFeedbackAddress, callback); } void DeviceService::clearSignals(int commandAddress, int feedbackAddress, const OperationCallback &callback) { m_modbus->writeCoil( commandAddress, false, [this, feedbackAddress, callback](bool commandCleared, const QString &commandError) { m_modbus->writeCoil( feedbackAddress, false, [callback, commandCleared, commandError]( bool feedbackCleared, const QString &feedbackError) { if (callback) { callback(commandCleared && feedbackCleared, commandCleared ? feedbackError : commandError); } }); }); } bool DeviceService::productionActionActive() const { return m_productionActionActive; } bool DeviceService::productionActionBusy() const { return m_productionActionBusy || m_modbus->isBusy(); }