Files
ssp/services/productionworker.cpp
T
lidg 407af2892d feat: 重构视觉取料流程及生产故障恢复
- 删除订单启动、暂停、复位相关 PLC 握手及无效反馈配置
- 清除报警改为仅写 clearAlarmCommand,不等待反馈
- 将拍照位移动、视觉处理和 RackPick 拆分为三个独立动作
- 增加 M850/M851 拍照位动作及 R60/M852 视觉结果流程
- 暂停改为等待当前机器人动作完成,视觉结果不确定时转人工确认
- 删除复位按钮,合并为恢复/重试按钮
- 普通 PAUSED 订单通过启动按钮继续
- 恢复前检查 PLC、安全状态、订单及动作命令反馈
- 支持在途动作接管、已完成动作收尾、安全重试和人工确认
- 故障状态保持订单 RUNNING,并持久化实际恢复阶段
- 恢复成功后仅清除本次软件故障对应的报警
- 更新小轴 PLC 地址、Modbus 配置和视觉集成文档
2026-10-29 17:20:14 +08:00

148 lines
4.4 KiB
C++

#include "productionworker.h"
ProductionWorker::ProductionWorker(QObject *parent)
: QObject(parent)
, m_service(nullptr)
, m_stopRequested(false)
{
}
void ProductionWorker::ensureService()
{
if (m_service) {
return;
}
m_service = new ProductionService(this);
m_service->setExternalStopFlag(&m_stopRequested);
connect(m_service, &ProductionService::visionMeasureRequested, this, &ProductionWorker::visionMeasureRequested);
connect(m_service, &ProductionService::visionCancelRequested, this, &ProductionWorker::visionCancelRequested);
connect(m_service, &ProductionService::visionCycleChanged, this, &ProductionWorker::visionCycleChanged);
connect(m_service, &ProductionService::visionProductionActiveChanged, this, &ProductionWorker::visionProductionActiveChanged);
connect(m_service, &ProductionService::stateChanged,
this, &ProductionWorker::stateChanged);
connect(m_service, &ProductionService::deviceStatusChanged,
this, &ProductionWorker::deviceStatusChanged);
connect(m_service, &ProductionService::deviceCommunicationError,
this, &ProductionWorker::deviceCommunicationError);
connect(m_service, &ProductionService::currentWorkpieceChanged,
this, &ProductionWorker::currentWorkpieceChanged);
connect(m_service, &ProductionService::currentWorkpieceSnapshotChanged,
this, &ProductionWorker::currentWorkpieceSnapshotChanged);
connect(m_service, &ProductionService::currentPositionChanged,
this, &ProductionWorker::currentPositionChanged);
connect(m_service, &ProductionService::productionFinished,
this, &ProductionWorker::productionFinished);
connect(m_service, &ProductionService::productionError,
this, &ProductionWorker::productionError);
connect(m_service, &ProductionService::alarmRaised,
this, &ProductionWorker::alarmRaised);
connect(m_service, &ProductionService::processElapsedChanged,
this, &ProductionWorker::processElapsedChanged);
connect(m_service, &ProductionService::timeoutWarning,
this, &ProductionWorker::timeoutWarning);
connect(m_service, &ProductionService::timeoutRecoveryRequired,
this, &ProductionWorker::timeoutRecoveryRequired);
connect(m_service, &ProductionService::recoveryCompleted,
this, &ProductionWorker::recoveryCompleted);
}
void ProductionWorker::requestStopImmediate()
{
m_stopRequested.store(true);
}
void ProductionWorker::updateVisionAvailability(bool ready, bool busy, const QString &session)
{
ensureService();
m_service->onVisionAvailability(ready, busy, session);
}
void ProductionWorker::receiveVisionResult(const QJsonObject &result)
{
ensureService();
m_service->onVisionResult(result);
}
void ProductionWorker::requestVisionSnapshot()
{
ensureService();
m_service->publishVisionSnapshot();
}
void ProductionWorker::reportFailure(bool success, const QString &error)
{
if (!success && !error.isEmpty()) {
emit productionError(error);
}
}
void ProductionWorker::requestStart(int orderId)
{
ensureService();
QString error;
reportFailure(m_service->start(orderId, &error), error);
}
void ProductionWorker::requestPause()
{
ensureService();
QString error;
reportFailure(m_service->pause(&error), error);
}
void ProductionWorker::requestResume()
{
ensureService();
QString error;
reportFailure(m_service->resume(&error), error);
}
void ProductionWorker::requestStop()
{
ensureService();
QString error;
reportFailure(m_service->stop(&error), error);
}
void ProductionWorker::requestClearAlarm()
{
ensureService();
QString error;
reportFailure(m_service->clearAlarm(&error), error);
}
void ProductionWorker::requestRecover()
{
ensureService();
QString error;
reportFailure(m_service->recover(&error), error);
}
void ProductionWorker::requestMarkNg()
{
ensureService();
QString error;
reportFailure(m_service->markCurrentWorkpieceNg(&error), error);
}
void ProductionWorker::requestRestore()
{
ensureService();
QString error;
reportFailure(m_service->restoreActiveRun(&error), error);
}
void ProductionWorker::requestShutdown()
{
ensureService();
m_service->shutdown(
[this](bool success, const QString &error) {
if (!success) {
reportFailure(false, error);
return;
}
emit shutdownReady();
});
}